0
Spur gears have straight teeth while helical gears have curved teeth. Generally, helical gears are usually quieter and smoother in operation, while spur gears are easier to make and much less expensive.
Helical gears are stronger than spur gears.
Wiki User
∙ 6y ago
Wiki User
∙ 13y agospur gears have straight teeths.
whereas helical gears have tooths crossed at an angle.
spur gears are very noisy and helical gears have greater load capacity than the spur gear of same size. This is because in spur gears take the entire load in the tooth whereas the helical gears distributes the same load on to the shaft hence the gear tooth itself takes less load than a spur gear of same size
Wiki User
∙ 11y agoHelical gear and screw pump are often interchangeable designations for a rotary positive displacement pump that moves fluids. In a single screw helical gear pump the gear looks like a screw and fits tightly into the casing in order to move the fluid axially along the screw. In a multiple screw helical gear pump two or more "gears" or screws intermesh with one another to pump a fluid axially or radially through the pump.
Wiki User
∙ 11y agobecause the car moves fowards and backward
Wiki User
∙ 9y agoHelical gears are used because they run more smoothly and quietly than straight-cut gears.
Wiki User
∙ 11y agoHelical gears are stronger than spur gears.
Wiki User
∙ 11y agoA helical gear is stronger.
Wiki User
∙ 10y agoBecause they are stronger than spur gears
Add your answer:
Earn +20 pts
Formula module in helical gear?
the module of a helical gear is calculated in the same way of that of a spur gear: module=pitch diameter / no of teeth the module of a helical gear is calculated in the same way of that of a spur gear: module=pitch diameter / no of teeth
Which gear system having minimum axial thrust?
Double helical gear
What does a helical gear look like?
Helical gears are similar to spur gear except it's teeth are slant. They have good load distribution, less noise and less wear compare to spur gear.
Is planetary gears used for spur gear?
Planetary gears can be spur or helical gears.
What is the difference between turbine turning gear and barring gear?
both are same using for rotating the turbine initially
Difference between helical gear and bevel gear?
A bevel gear provides torque and rotation at 90 degrees, and a helical gear provides it at 180 degrees.
What is a helical gear?
A helical is a spur gear with an angle along the face to increase the gear contact ratio. The gear teeth are cut at angles http://www.motioncontrolguide.com/learn/faqs/gearboxes-and-gears/helical-gears/what-is-the-difference-between-a-helical-gearbox-and-a-straight-gear-tooth-gearbox/ hope this helps
How much the flow difference in helical gear compare to spur gear?
The flow difference in gear compares because it spurs for 5 hours.
Formula module in helical gear?
the module of a helical gear is calculated in the same way of that of a spur gear: module=pitch diameter / no of teeth the module of a helical gear is calculated in the same way of that of a spur gear: module=pitch diameter / no of teeth
What is difference between bevel gear and worm wheel?
A bevel gear is cone shaped with the gear teeth placed vertically along the periphery. A worm gear is barrel shaped with the teeth spiraling along the length like a screw.
Which gear system having minimum axial thrust?
Double helical gear
What does a helical gear look like?
Helical gears are similar to spur gear except it's teeth are slant. They have good load distribution, less noise and less wear compare to spur gear.
Which gear type does not have axial thrust?
herring bone gear (Double helical ) doesn't axial thrust
What is the Difference between pulley and a gear?
what is
Why are helical gears more favourable than spur gears?
bevel gears are used for power transmitting between the shafts which intersect at some angel ( usually right angel) , but the spur gear is used for shafts which are parallel and coplanar.
Is there any difference between ATA sparring gear and WTF sparring gear?
Sparring gear is universal.
What is the difference between a driver gear and a driven gear?
The driver gear has the input torque, and the driven gear has the output torque.
