Ratio of Average load to Maximum demand for a given period (for a day, month or year) is termed as Load factor or Plant Load Factor (PLF).
Load Factor = Avg. Load*24/Max Demand*24 ......... For a Day.
This Load factor is very important in the sense of calculating the overall generation cost. It is always less than 1. Higher the LOAD FACTOR of a power station,lesser the overall per unit generation cost of the power station.
power factor depends on the load being fed if the load is entirely resistive power factor will be unity ..if the load includes an inductor or capacitpr due to phase displacement between v and i the pf will be lag or lead respectievly
The most common method of improving the power factor of a load is to connected a capacitor or capacitor bank, of appropriate reactive power (expressed in reactive volt amperes), in parallel with the load.
Capacitor banks are installed in the electrical room to improve the power factor which is related to the inductive load caused by motors etc . The capacitors create a capacitive load which subtracts against the inductive load thereby improving the power factor. Most power utilities have penalties when your power factor drops below a certain value.
Diesel Engine has high load factor
A load loss factor, LLF,not loss load factor,Êis a calculation used by electrical utility companies to measure energy loss.Ê Its the ratio of average load loss to peak load loss.
Power factor doesn't necessarily 'improve with the load', but it is determined by the load.
Improving power factor does nothing to improve a circuit. It merely affects the amount of current drawn by the load.
power factor depends on the load being fed if the load is entirely resistive power factor will be unity ..if the load includes an inductor or capacitpr due to phase displacement between v and i the pf will be lag or lead respectievly
The load (in this case, your led lighting) determines its own power factor. While you can improve the power factor (move it towards unity) at the terminals, you are not actually changing the power factor of the load.
The most common method of improving the power factor of a load is to connected a capacitor or capacitor bank, of appropriate reactive power (expressed in reactive volt amperes), in parallel with the load.
Capacitor banks are installed in the electrical room to improve the power factor which is related to the inductive load caused by motors etc . The capacitors create a capacitive load which subtracts against the inductive load thereby improving the power factor. Most power utilities have penalties when your power factor drops below a certain value.
Load Factor
the maximum load factor without structural damage to the aircraft. Load factor = 1 / (cos (angle of turn))
it will improve the power factor... The angle between voltage and current will decrease depends on capacitor value.
Power factor can be unity. If the load is purely resistive, then the load current and supply voltage are in phase, and the load will have unity power factor.
Load factor and current are not directly related
Diesel Engine has high load factor