The answer depends on the flow rate or the water pressure, not just the pipe size.
you fill the five gallon then dump three of that into the three gallon so you have 3 in the 3 and 2 in the 5 then you dump out the three and fill the 3 with the remaining two gallons and fill the 5 completely so you have a combined 7 gallons.
Notation: ( x , y ) where x is the amount of water in the 3-gallon container and y is the amount of water in the 5-gallon container1. Fill the three-gallon container ( 3 , 0 )2. Pour the three gallons into the 5-gallon container ( 0 , 3 )3. Fill the three-gallon container ( 3 , 3 )4. Fill the five-gallon container with the three-gallon container, leaving 1 gallon in the three gallon container ( 1 , 5 )5. Pour out the water from the five-gallon container ( 1 , 0 )6. Pour the water from the three-gallon container into the five-gallon container ( 0 , 1 )7. Fill the three-gallon container ( 3 , 1 )8. Pour the water from the three-gallon container into the five-gallon container ( 0 , 4 )Another great answer here:[See below for the related link]
# Fill the 4-gallon jug with water then put it in the 9-gallon jug. # Repeat this step. The 9-gallon jug now has 8 gallons. # Fill the 4-gallon jug a third time, but pour only enough into the 9-gallon jug to fill it completely with no overflow. # The 4-gallon jug now has three gallons. Put that water aside safely, then repeat 1-3 for a total of six gallons.
One quart
4,892
Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.
Measure the height of the drum with a tape measure. Divide the total height by 5. Multiple this result by 4. This will tell you how high the water must be in the drum to make 4 gallons. Make a mark on the inside of the drum at that height and fill the drum to the mark. Fill up the drum and then pour out one gallon.
an extension adapter must be installed to the drum fill adapter
How many bags of concrete does it take to fill upHey
About 7 bushels
16 halfpint cartons of water are needed to fill the gallon container
The unit weight of sand/soil is 105 lbs/cu ft1-gallon (dry) is equivalent to 0.156 cu ftSo a 55-gallon drum has a capacity of 55*0.156 = 8.58 cu ftSoil unit weight * drum capacity cu ft = 105*8.58 = 900.9 lbs
Instructions: 1. Fill the sprayer tank with half gallon of water. 2. Add Relegate and fill the gallon with another half gallon water. 3. Apply immediately. And do not store.
you fill the five gallon then dump three of that into the three gallon so you have 3 in the 3 and 2 in the 5 then you dump out the three and fill the 3 with the remaining two gallons and fill the 5 completely so you have a combined 7 gallons.
Notation: ( x , y ) where x is the amount of water in the 3-gallon container and y is the amount of water in the 5-gallon container1. Fill the three-gallon container ( 3 , 0 )2. Pour the three gallons into the 5-gallon container ( 0 , 3 )3. Fill the three-gallon container ( 3 , 3 )4. Fill the five-gallon container with the three-gallon container, leaving 1 gallon in the three gallon container ( 1 , 5 )5. Pour out the water from the five-gallon container ( 1 , 0 )6. Pour the water from the three-gallon container into the five-gallon container ( 0 , 1 )7. Fill the three-gallon container ( 3 , 1 )8. Pour the water from the three-gallon container into the five-gallon container ( 0 , 4 )Another great answer here:[See below for the related link]
you fill the 7 gallon jug and then place the water into the 5 gallon jug. You will end up with 2 gallons because you subtracted 5 gallons, place that water somewhere else and repeat the process.
A bushel is a set measure of volume equal to 1.25 cubic feet so and there are 0.156 cubic feet per gallon so 5 bushels of grain would fit in a 40 gallon drum which in the case of dry corn would weigh 280 pounds.