60 dB sound pressure level is about conversational speech listened in 1 meter distance.
You will laugh: 60 dB sound intensity level is equal to 60 dB sound pressure level (SPL).
Decibels (db) is relative power, log base 2, times 3. Increasing power from 200 watts to 400 watts is doubling power, so the decibel change is +3 db.800 watts would be +6 db, 1600 watts would be +9 db, 100 watts would be -3 db, 50 watts would be -6 db, and so on.
The decibel scale is a logarithmic scale where each change in three dB represents a power factor change of two. (3 dB is power times two, 6 dB is power times four, 9 dB is power times 8, etc. Similarly, -3dB is power divided by two, -6 dB is power divided by four, etc.) Zero dB is assigned some arbitrary reference power. One example is 1 mV across 600 ohms. If you double the voltage into a constant resistance, the power quadruples, so 2 mV would be +6 dB, 4 mV would be +12 dB, etc. The letter after dB is the reference power. In the case of dBm, it means that 0 dB is 1 milliwatt, so 2 milliwatt is +3 dB, etc. There are many dB scales, such as dBa, used in sound measurements. Still, fundamentally, 3 dB is a doubling of power, -3 dB is a halving of power, so, for any arbitrary scale, say dBq, then saying +6dBq is saying a power four times higher than 0 dBq. In the end, dBm plus dBm is delta dB, with no scale.
DB-25 D-Sub-9 or D-Sub-25
If you mean the sound pressure level that causes pain, it is about 120 dB SPL.
Deci-bels (dB) are a logarithmic measure of system/network amplification or gain (G). The logarithms are taken to the base 10 and multiplied by 20:dB = 20logG (where G is the gain of the system)To give an example of what this means:G = 0.01, so dB gain = 20log0.01 = 20 * -2 = -40dBG = 0.1, so dB gain = 20log0.1 = 20 * -1 = -20dBG = 1, so dB gain = 20log1 = 20 * 0 = 0dBG = 10, so dB gain = 20log10 = 20 * 1 = 20dBG = 100, so dB gain = 20log100 = 20 * 2 = 40dBG = 10000, so dB gain = 20log10000 = 20 * 4 = 80dBThere are other uses for dB in electronics, where logarithms are useful they are preferred. The reasons logs can be useful is because the natural log of an exponential curve is a straight line, allowing for easier ways of understanding the behaviour of a system.
A normal conversation has a loudness (decibels level) of about 60 dB. As iy approached 70 dB it would be come loud.
140 dB A normal conversation is about 60 dB (Just to let you know how loud fireworks are)
100 dB
A avalanche can range from 100 dB to 180 dB
90 db
Since the db scale is relative, it depends on what 0 db means. Typically, however, 69 db is a very soft sound, almost a whisper.
That's the sound of the Earth disintegrating.
Ballpark? 25 - 30 dB.
About 132 dB(A)
The sound pressure of 45 dB is about a quiet library and 50 dB is about an everage home.
70 dB is 10 times louder than 60 dB.
If you want to express large numbers of ratios with small values you will like the decibel. 1000 volts means 60 dB. The reference 0 dB = 1 volt. 0.001 volt means -60 dB.