i have three on mine two tail lights and one under the spoiler
if you pull up ever so slightly on the e-brake the lights wil go out. carefull not to engage the brake while moving. but just lifting it a little will engage a sensor that turns out the lights.
On my 98 sunfire, the tail lights and marker lights only work if you turn on the headlights. If only the daytime lights are on, the Pontiac on the trunk is illuminated but no other lights at the rear until brakes or turn signals are activated. This is common with a lot of vehicles out there. Daytime running lights are not necessarily the same candle power as the headlights. I can tell a big difference in mine.
There is no speedo cable on a Sunfire.
WHAT ARE THE WIRE COLORS FOR BRAKE AND TURN SIGNALS ON 1999 PONTIAC IN ORDER TO HOOK UP TRAIER HITCH PLUG?Not positive yeLL0w wire Left turn signal, riGht Green wire once you have the turn signal wiring hooked up the brake lights will automatically work because the brake lights work through the turn signal wiring, brown running lights, white ground.
You can not.
hell no
What is the firing order for a 1999 Pontiac sunfire 2.2L 4cyl Engine?
Yes
pontiac350enginebuild.blog.friendster.com/
.040
from what I've found the only way to shut off your daytime running lights is to put on the e-brake, or take out the fuse, which isn't the best idea. the daytime running lights will also usually not work if there is a blown hi-beam light
M12 1.5mm