There are no units for the temperature. The temperature change could be 230 Celsius degrees or 170 Fahrenheit degrees (94 Celsius degrees). In fact they could be in less commonly used units: eg Reaumur.
313
25
144
100 BTU if it's Fahrenheit
If you're in Celsius, 13459.5 Btu's. If you're in Fahrenheit, 12632.5 Btu's.
There are at least 5 different definitions for slightly different BTUs. One of them says that 1 kWh = 3412.14 BTUs. Let's use that one. 1 kWh = 3412.14 BTUs 12 kWh = 40,945.68 BTUs
313 Btu
That will completely depend on how much water there is.
25
2250
6,520 Btus
144
100 BTU if it's Fahrenheit
There are no BTUs in an office water-cooler. But you can calculate how many BTUs are removed by the cooler. One BTU or British Thermal Unit is the amount of heat energy required to raise the temperature of one pound of water one degree Fahrenheit. There for when you remove one BTU you are lowering one pound of water one degree Fahrenheit. So if you know how many pounds of water you have and the temperature of the water you start with and the temperature of the water comming out of the cooler you can calculate how many BTUs the cooling unit of the water cooler has removed. BTU=Temp1 - Temp 2 X LB water
LATENT HEAT OF FUSION When one pound of ice melts, it absorbs 144 BTUs at a constant temperature of 32°F. If one pound of water is to be frozen into ice, 144 BTUs must be removed from the water at a constant temperature of 32°F.
actually its 313.
1)This is a 5 part question. The first is realizing that 20F to 32F uses .5BTU per pound per degree. That means it takes 32-20=12*.5=6BTUs to get the ice to 32F. 2)Then you need to know the Latent Heat of Fusion for Ice which is 144BTUs (given). Lets assumes the ice changes from ice to water instantaneously at 32F. 3)Next we calculate the BTUs from 32F to 212F. Which is 1BTU per pound per degree F. 212-32=180 so it take 180BTUS. 4)Next we have to use the Latent Heat of Vaporization of water which will say instantaneously converts water to vapor. This takes 970BTUS (given). 5)Then we calculate the BTUS from 212F to 220F. Which is .5BTUs per pound per degree F which is 220-212=8*.5=4BTUs...... Finally add up all the BTUs and you get 6+144+180+970+4=1304BTUs.
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.