They do not compare.
Inches of water is a pressure measurement, GPM is a flow measurement.
A 1000 watt device operated continusouly for 1 hour would equal 1 Kwh.
about a half hour
Power - Watt. Energy - Watt Hour. Power factor - no unit. just number less than or equal to 1.
Have a look at AuroraGenerators.com If it is diesel your looking at about 1 gallon per hour however likely you are not running at full load. You can expect to be using on average 0.5 gallons per hour on an Aurora Diesel Generator
You do not mention how much you want to heat the water and in what period of time. But here are the figures: 1 btu = temperature increase of 1* F of 1 pound of water. One gallon of water weighs 8.33 lbs. So a boiler with an output rating of 2,332,400 btu will raise the temperature 1*F in 1 hour. (280,000x 8.33). Boiler outputs are rated in btu per hour . how many btu does it take to heat 15lb of water from 100 degrees F to 129 degrees F?
One cubic meter is equal to about 35.5 cubic feet. 17,000 x 35.5 = 603,500 ft3 One cubic foot is equal to 7.5 gallons. 603,500 x 7.5 = 4,526,250 gallons per second There are 3,600 seconds in one hour. 4,526,250 x 3,600 = 16294500000 gallons an hour.
50 gallons of water per minute equals 3,000 gallons per hour.
Easily! A normal garden hose will typically use 360 gallons a minute. 540 liters is equal to 142 gallons.
2 gallons per hour
10 US quarts per minute is 150 US gallons per hour.
1 inch every 20 minutes is 3 inches every hour. 3 inches * 1600 ft squared = 400 cubic feet of water per hour. 400 cubic feet * 7.480519481 = approximately 2992 gallons per hour. 2992 gallons per hour / 60 minutes per hour is approximately 60 gallons per minuted (49.8666 gallons per minute). You should probably get a pump that can handle a little more than that, just to take care of the surges.
1 cubic foot equals 7.48 gallons so 106 cubic feet per hour would equal 793 gallons per hour or 13 gallons per minute
52 inches per second is equal to 5,200 yards per hour.
If a pool was leaking for 12 hours and leaked out 78 gallons of water in total, then it would of leaked out 6.5 gallons every hour. This is a math problem.
1 long ton (2240 lbs) = 223.50 UK gallons per hour / 268.44 US gallons per hour > 1 short ton (2000 lbs) = 199.55 UK gallons per hour / 239.68 US gallons per hour
There are 12 x 3 x 1760 = 63360 inches in one mile. Therefore, 45 miles per hour is equal to 45 x 63360 = 2851200 inches per hour. There are 3600 seconds in one hour. Therefore, 2851200 inches per hour is equal to 2851200/3600 = 792 inches per second.
1 mile per hour is equal to 17.6 inches per second. Therefore, n miles per hour = 17.6n inches per second.