Motherboards

How many pins does the regular ATX power connector to the motherboard have?

101112

Top Answer
User Avatar
Wiki User
Answered
2008-02-06 01:31:46
2008-02-06 01:31:46

A regular ATX motherboard uses a single 20-pin P1 connector with optional 4-pin auxillary power connector

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


the regular ATX has a 20 pin power connector, while the enhanced ATX power connector has 24 pin power connector.

an enhanced ATX power connector uses a 24-pin P1 connector and a enhanced BTX power connector uses a 24-pin P1 connector

There are many differences between AT and ATX motherboards. The most noticable, without disassembly, are probably the keyboard connector (AT is much larger) and the power switch. The power switch for an AT motherboard clicks on and clicks off. The power for an ATX motherboard is a momentary push button that is always open unless pressed. Internally the best indicator is the power supply connector to the motherboard. An AT motherboard uses a two piece single row connector. An ATX motherboard connector is one piece with two rows of ten connections.

Many/most motherboards have a separate power connector for the CPU. Check your motherboard's installation instructions to locate the CPU power connector. Then connect the matching power supply cable to the CPU power connector on the motherboard.

A motherboard has many components. These components include the power connector, PCI slots, the back panel ports and connectors, and the memory controller hub.

There are usually 24 pins for main power. The processor uses either 4 pin or 8 pin power connectors.

ATX Ver 1.0 has one 20 pin port ATX Ver 1.1 has one 20 pin port and a 4 pin port ATX Ver 2.0 has one 24 pin port and a 4 pin port

The main power connector 20-24pin. One for the CPU 4-8 pin. PCI express 4 pin. It's depend on what type of motherboard do you have. But commonly, new motherboards uses 2 power cord P8 and P9.

BTX motherboards use a 24-pin power connector.

Depends on the motherboard some use two connectors from the power supply to MB> some use one.

There are many ATX motherboard types, uATX, MATX, Baby-ATX etc. The standard has also been modified as the power requirements have changed. Generally, they are: Some version of the ATX power supply connector (currently 24 pins plus the auxilary 4-pin 12volt connector; The locations of the holes to screw it into the case; The location of the ports cluster, to match the cut-out in cases for it; and The location of the expansion slots. formfactors.org can tell you more.

2 - Uses the P8 and P9 power connections.

in order to choose the correct power supply. You need to know how many watts your system needs and the type of form factor your motherboard is. You also need to know if you need auxiliary power, such as a 4 pin or 8 pin connector, since some power supplies do,not come with one or both of these connectors.

it depends there are both 6pins and 8pins

How many EIDE devices does a motherboard support?

Each model motherboard is different but most have power, fan, cpu, ide, floppy, AGP, PCI, RAM. The new generation SATA boards are different again

A DIN connector has a 5-Pin connector

It depends on the motherboard. There are many different types.

It is from power supply It is the cube with many holes for the wire It is located in the bottom left of the computer case probably under the motherboard and the video card

form_title=Buy a Power Generator form_header=Have a source of power available in case of emergency. How many power generators do you need?= {(),1,2,3,4,5,More} What will you use the power generator to power?=_ Will you use this for emergency or regular use?= () Emergency () Regular

90 and its the ram not the whole motherboard

what are the many files lines on the top and bottom of the motherboard surface


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.