0
What else can I help you with?
How many sand water and cement goes in the concrete mix?
sand=2*Weight of Cement water=cement/2
How many cement bags in M10 concrete?
4.4 bags
How many sack of sand gravel in 1 sack of cement?
The typical mix for concrete often uses a ratio of 1 part cement to 3 parts sand and gravel. Therefore, for every sack of cement, you would typically use about 3 sacks of sand and gravel combined. However, the exact amount can vary based on the specific mix design and the desired strength of the concrete. Always refer to specific guidelines for your project for the best results.
How many sacks of cement are in a barrel?
There is no regular size of 'sack' and too many sizes of 'barrel'. -You need to be much more specific.
How many psi is six sack cement?
The compressive strength of six sacks of cement typically refers to the mix design of concrete, which is measured in pounds per square inch (psi). A six-sack mix generally contains six 94-pound bags of cement per cubic yard of concrete, resulting in a strength of approximately 4,000 to 5,000 psi, depending on the specific mix and curing conditions. However, actual strength can vary based on factors like aggregate type, water-cement ratio, and curing methods.
How many yards of cement needed for a 40x60 patio?
Thickness? Do you mean cement or concrete - cement is the binder/adhesive in the concrete.
How many sacks of concrete will you need for a 4 foot by 4 foot by 4 inch thick slab?
2,000,000,000,000,000,000,000,000,000,000,000,000 sacks
How many concrete hollow blocks produce in a bag of cement?
How many 8"X8"X16" concrete hollow block from 50 kg cement
How many sacks of 60 pound concrete does it take to make 0.12346 yards of concrete?
Less than one.
How many cement bags per 1 cubic meter of concrete?
7 cement bags per 1 cubic meter of concrete......
How many bag of cement for 1m2 of concrete blocks joint?
0.42cub.m (Cement sand mortar)
How many sand water and cement goes in the concrete mix?
sand=2*Weight of Cement water=cement/2
What is the dry density of cement?
The cement density is used in the calculation of the total aggregate content and of the concrete density.Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.
What is dry density of cement?
The cement density is used in the calculation of the total aggregate content and of the concrete density.Normal concrete has a density around 2400 kg/cubic meter or 4048 lb/cubic yard. There are many different kinds of concrete, many of which are much lighter. Cement is the liquid (or paste like) form, and tends to be much heavier than when it has cured into concrete. "Cement" is not concrete, but can be used to make concrete by mixing with sand, stone and water. The density of cement is about 3120kg/m3.
How many cement bags in M10 concrete?
4.4 bags
How many sack of sand gravel in 1 sack of cement?
The typical mix for concrete often uses a ratio of 1 part cement to 3 parts sand and gravel. Therefore, for every sack of cement, you would typically use about 3 sacks of sand and gravel combined. However, the exact amount can vary based on the specific mix design and the desired strength of the concrete. Always refer to specific guidelines for your project for the best results.
How many yard in a sack of concrete?
The other way around - it takes something like 18 -24 sacks to make a yard of concrete.
