In Pensacola, FL the mixing plant is currently charging $70 per ton for SP12.5 and about $67 per ton for SP9. Prices link with oil obviously. You can search for asphalt calculator to get a conversion from yd to ton. Materials are priced by weight.
Asphalt is typically laid at a thickness of one inch. If this is the case then a square yard of asphalt would weigh approximately 2.05 tons. If the thickness is more or less the actual weight would vary.
about 13.3 cubic feet
asphalt is about 150 lb/cubic foot
This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area.
I think it is $504.00 no your wrong states are different but Florida is like $80.oo a ton
54 sq ft
As a rule of thumb, 0.112 tons of asphalt (2" thick) will cover 1 square yard or 9 square feet. Thus 1 tone of asphalt (2" thick) will cover 8.93 square yards or 80.36 square feet. ------------------------------- Another (possibly more accurate) way of doing this is to use standards 1 ton [long, UK] = 2240 pounds Density of compacted Asphalt = 147 pounds per cubic foot (1728 cubic inches) 12 inches times 12 inches times 2 inches = 288 cubic inches Thus the weight of 288 cubic inches of compacted asphalt will be (288/1728)* 147 = 24.5 pounds. Therefore a tone of asphalt will cover 2240/24.5 = 91.43 square feet to a depth of 2 inches.
Does not compute. Cubic feet is a measure of volume. Square feet is a measure of area.
Cubic feet is a measure of volume while square feet is a measure of area. They do not directly convert.
There are 144 square inches in a square foot and 1.728 cubic inches in a cubic foot. So you have 7,776 square inches and that would give you 7,776 cubic inches. That would be 4.5 cubic feet.
This is not a correct conversion. Cubic feet is a measure of volume while square feet is a measure of area.
1 cubic yard = 27 cubic feet.
453.6 cubic feet=138.29 square feet
As a rule of thumb, 0.112 tons of asphalt (2" thick) will cover 1 square yard or 9 square feet. Thus 1 tone of asphalt (2" thick) will cover 8.93 square yards or 80.36 square feet. ------------------------------- Another (possibly more accurate) way of doing this is to use standards 1 ton [long, UK] = 2240 pounds Density of compacted Asphalt = 147 pounds per cubic foot (1728 cubic inches) 12 inches times 12 inches times 2 inches = 288 cubic inches Thus the weight of 288 cubic inches of compacted asphalt will be (288/1728)* 147 = 24.5 pounds. Therefore a tone of asphalt will cover 2240/24.5 = 91.43 square feet to a depth of 2 inches.
As an area of square feet has no height, it has no volume which is measured in cubic feet. Thus there are 0 cubic feet in 440 square feet.
Square feet and cubic feet are units of different measurements. Square feet is a unit of area. Cubic feet is a unit of volume.
The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.
infinitely many, because a square feet is a surface and a cubic feet a volume. since a surface has no volume you can fit infinitly many in a cubic feet.
Cubic feet do not go into square feet. Cubic feet is a unit of volume lengthxwidthxheight Square feet is a unit of area lengthxwidth.
Does not compute. Cubic feet is a measure of volume. Square feet is a measure of area.
Square feet is length x width and is given in square feet. Cubic feet is length x width x depth and is given in cubic feet.
7 feet by 14 feet = 98 square feet 98 square feet by 4 feet = 392 cubic feet There are 9 square feet in a square yard, and there are 29 cubic feet in a cubic yard.... so 392 cubic feet = 14.519 cubic yards
That is not a proper conversion. Cubic feet is a measure of volume and square feet is a measure of area.