0
Generally 1000 units. This goes for humalog and lantus.
Wiki User
∙ 14y ago
Wiki User
∙ 11y ago1000
Add your answer:
Earn +20 pts
How many units of insulin is 0.25ml?
100.5
How many days will 1 vial of insulin last if the sig is inject 50 units SQ Qday?
20 days
One bottle of insulin 100ml-10 units a day how many days will it last?
There is 1000 Units per bottle so 10 units a day will last 100 days..
How do you draw 125 units on an insulin syringe?
you don't ever want to draw up 125 units of insulin to admiminster. This is a lethal dose and can cause death if given at one time
A vial regular insulin is labeled 100 units per 1 milliliter how much should be given to administer a 15 unit dose?
Syringes are marked for measuring insulin.
If you have a 10000 unit vial and mix it with 10ml of water how many ml from that vial is equal to 125 units?
2ml?
What is the price of 3ml insulin vial in India?
Two Dollars
How do you use an insulin pump correctly?
"When using an insulin pump, the reservoir needs to be filled with insulin. You do this by drawing insulin from a vial into the reservoir with the plunger, and then removing the needle."
Can regular insulin and nph be mixed together?
Yes, regular insulin and NPH (Neutral Protamine Hagedorn) insulin can be mixed in the same syringe. This combination is commonly referred to as "mixed insulin" and is used for certain insulin therapy regimens. Regular insulin is a short-acting insulin, while NPH insulin is an intermediate-acting insulin. It's important to follow proper mixing techniques to ensure the effectiveness of the insulin and to avoid contamination. Here are general steps for mixing regular insulin and NPH insulin in the same syringe: Wash your hands: Clean your hands thoroughly with soap and water. Gather supplies: Collect the vials of regular insulin and NPH insulin, a syringe, and alcohol swabs. Roll the NPH insulin vial: Gently roll the NPH insulin vial between your palms to ensure uniform suspension. Clean the rubber stoppers: Wipe the rubber stoppers of both insulin vials with alcohol swabs. Draw up air into the syringe: Draw air into the syringe equal to the dose of NPH insulin needed. Inject air into the NPH insulin vial: Insert the needle into the NPH insulin vial and inject the air. Draw up NPH insulin: Invert the vial and withdraw the correct dose of NPH insulin. Inject air into the regular insulin vial: Insert the needle into the regular insulin vial and inject the air. Draw up regular insulin: Invert the vial and withdraw the correct dose of regular insulin. Check for air bubbles: Hold the syringe upright and tap it to dislodge any air bubbles. Push the plunger slightly to remove any air. Verify the dose: Double-check that you have the correct total dose in the syringe. Administer the injection: Administer the injection as prescribed by your healthcare provider. Always follow the specific instructions provided by your healthcare provider or the insulin manufacturer. If you are unsure about the proper technique for mixing insulin or have any concerns, consult with your healthcare team for guidance.
How many units of insulin are in a mililiter?
You cannot make a direct conversion of insulin IU to ml. It depends on the concentration of insulin in the vial you are using. One commonly used concentration is 100 IU/ml, (sometimes called "U100") but this is NOT true for all insulin. If the concentration is 100 IU/ml, then each ml contains 100 IU and the conversion is 100 units = 1 ml.
Can Lantus insulin and novolog insulin be mixed together?
No, Lantus clearly states on the vial and on the box, "Do not mix with other insulins."
How do you inject insulin?
First, you must have the vile of insulin and a clean, sterile syringe that has not been used yet. Put the needle of the syringe in the hole of the insulin vile, and turn it upside down. Then, pull down on the moveable part of the syringe to the amount you want in the syringe. Then, take the syringe out of the vile, and set the vile down. Next, wipe the spot where you are going to inject the insulin into with an unused alcohol swab. Then, put the needle into the spot where you want to inject yourself, and then inject the insulin into your body. Then, take the needle back out of your body, and you have just injected insulin. ****** And before drawing insulin (or any other injection) you should wipe the top of the vial (the rubber part) thoroughly with a fresh alcohol swab. Use two things - TIME and FRICTION to try to remove as much bacteria from the stopper as you can. Do not touch the top with your finger - only the alcohol swab. This will help prevent your needle (sterile) from contaminating the contents of the bottle by picking up bacteria from the rubber stopper as you insert it through the stopper - and it will save contaminating you when you inject yourself! Don't forget to first inject the amount of air equivalent to the dose of insulin you will be withdrawing from the vial. If you are administering insulin per a sliding scale, calculate the dosage according to your pre-meal blood glucose reading using the sliding scale recommended by your health care professional. If you are administering a basal dose of a intermediate acting insulin like insulin isophane (NPH), or the very-long-acting insulins such as insulin detemir (Levemir) or insulin glargine (Lantus), follow the dosage your health care provider has recommended. Remember that you MUST use an INSULIN syringe only, as they are calibrated in "UNITS" not milliliters. NPH insulin (the cloudy insulin) can be mixed with other types of insulins EXCEPT FOR detemir and glargine. Insulin detemir (Levemir) and insulin glargine (Lantus) SHOULD NOT be mixed in the same syringe with ANY other drug or insulin. To mix two insulins, such as insulin aspart (Novolog) and insulin isophane (NPH) remember you must draw up the clear insulin first. So first, you roll the bottle of NPH (the CLOUDY insulin) to mix it. DO NOT SHAKE as this will instill air bubbles in the insulin! Then you fill the needle with the amount of air that is equal to the dose NPH (the CLOUDY insulin), and JUST INJECT THE AIR into the NPH vial (DO NOT draw the insulin at this time). Remove the needle, draw up the amount of air equal to the dose of the Novolog, and inject it into the vial of Novolog, then draw that amount of Novolog into the syringe. Now, REINSERT the needle into the NPH vial, (no need to inject any more air, we already did that!) and withdraw the dose of NPH. When finished, you should have ONE dose equivalent to the sum of both insulin doses. So for example, you have a basal dose of 5 units of NPH, and your sliding scale says at your blood glucose reading of 180, you should take 2 units (JUST AN EXAMPLE - *ALWAYS* follow the sliding scale given to you by YOUR health care provider!), then you would clean the top of the NPH vial with a swab, inject 5 units of air, then with a clean swab, clean the Novolog, inject 2 units of air, turn it over, careful to support the bottle so the needle does not bend, and draw 2 units of Novolog into the syringe. With the needle still in the vial, gently flick the needle if any air bubbles remain, until you have nothing but insulin in the syringe. The air won't hurt you, but it will displace the insulin, making the dose less than it should be. Then go back to the vial of NPH and withdraw the 5 units, for a total of 7 units in the syringe. You may wish to draw a tiny bit more NPH, and then flick the syringe to removed trapped air after removing it from the bottle. Gently squirt the tiny bit of extra insulin and air until you are at the 7 unit mark. Then you would be ready to inject the total at the chosen site, after cleaning the skin with another alcohol swab. There are also now insulin "pens" on the market now, with screw on tips that contain a shielded needle to prevent sticks, and some even have an indicator that shows when the dose was injected properly. However, these tend to be more expensive due to the cost of the needle tips in addition to the cost of the pen (insulin) itself. For use of the pens, it is best to consult a health care professional, pharmacist, or diabetes educator. ALWAYS check your insulin for expiration date - do not use insulin that is past date, as it may not work as expected. It is always best to seek advice from a health care professional or diabetes educator before beginning insulin injections for the first time. They can help with training and personalized advice to help take some of the pain out of taking your insulin shots.
