Depends on the size of the unit.
approximately 1440 watts. Or a 12 amp draw @120 volts ac. Older units will draw more current. This is the draw after start up.
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
Watts = Amps x volts. What is the current draw and voltage of the calculator.
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
Watts is the amount of power the heater has and amps would be the draw- if it is a 120 volt heater than the amps would be 12.5 amps and it is instantaneous
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
A typical ink-jet printer such as used at home would draw around 5 watts on stand-by and 25 to 35 watts while printing. A typical laser-printer such as used in an office would draw about 35 to 50 watts on stand-by and up to about 350 to 500 watts while printing.
Watts = Amps x Volts. Amps = Watts/Voltage. Amps = 2500/apply voltage here.
It will draw 150 watts. The capacitor is there only to increase the voltage enough to "excite" the free electrons in the gas to ignite.
Impossible to know. You need to know both the voltage and current draw to calculate power (watts). Power in watts = Volts X Amps
The current draw in amps mulitiplied by the voltage.
1840