The diameter of the wire measured in MCM, (thousand circular mils). Wire sizes in the U.S. are described in AWG, (American Wire Gauge) such as #12 awg printed on the wire.
Wire is not sized by voltage. It is sized by current measured in amps. Some common copper wire sizes and their current capacities are: 15 amps -- 14 gauge wire 20 amps -- 12 gauge wire 30 amps -- 10 gauge wire 40 amps -- 8 gauge wire
Wire gauges are defined in such a way that the lower the gauge, the thicker the wire. So, 8 gauge wire is thicker than 10 gauge wire.
Yes, you splice a small length of 16 gauge wire to 18 gauge wire for a repair.
The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.
Standard Wire Gauge refers to a set of wire sizes.
No, you can never mix wire sizes in a circuit.
In North America the system used is AWG. American Wire Gauge.
The diameter of the wire measured in MCM, (thousand circular mils). Wire sizes in the U.S. are described in AWG, (American Wire Gauge) such as #12 awg printed on the wire.
Wire sizes are governed by the amperage the wire is to carry. To answer this question the load current is required.
Sometimes. Circular mills is a way of measuring wire size. It's a measurement of area. It's used to state the cross sectional area of round wire, because the current (electricity) carrying ability of wire is related to this area. In the U.S. wire gauge (18 gauge, 14 gauge, etc.) is used to state wire sizes until they become large. Large sizes (larger than 0000 gauge maybe) are stated in circular mills, but the size of any wire could be stated in circular mills.
The amps that a four gauge wire will handle will depend with the thickness of the wire. If the wire is thin, the four gauge will handle 95 amps.
Barbed wire comes in different sizes, from 12.5 gauge to 16 gauge, depending on the types of animals used, the size, and how hard on fences they are. But to the untrained eye, there really is only one type of barbed wire fencing out there.
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
34 gauge copper wire will work but to use the 35 gauge copper wire is the best choice
the gauge of the wire determines how much amperage a wire can carry the insulation determines how much voltage the wire can handle
Yes, because a thinner wire has higher resistance and dissipates more energy as heat.