lbs*ft: 1. 15 2. 30 3. 37 4. Loosen the long bolts, 2-3 turns, then tighten to 30-37, plus 175-185 degree. 5. Loosen the short bolts, 2-3 turns, then tighten to 10-18, plus 75-85 degree. Pay attention to the tighten sequence.
No, the 1994 Mercury Sable does not use R12 for recharging the A/C unit. The 1994 Mercury Sable uses R134a Freon.
Yes , a 1994 Mercury Sable is a front wheel drive vehicle
what is the cost to replace the rack and pinion on a 1994 mercury sable
In a 1994 Mercury Sable : " regular " unleaded gasoline , 87 octane
on the steer wheel
A code 111 on a 1994 Mercury Sable is a KOER code. This specific code means that no other codes are coming up on the vehicle.
Inside the transmission
Most likely you have a problem with the torque converter or the valve body in the transmission. If you have around 85,000-120,000 miles on your Sable/Taurus, this is a common issue. Having a transmission specialist look at the vehicle is an expensive but necessary pitfall.
The transmission dip stick on a 1994 Mercury Sable is located on the driver's side of the motor. It has a white-handled ring and it is about midway between the radiator and the back fire wall.
look in the glove box
I was looking at one of the Ford websites and it shows for a 1994 Mercury Sable ( Motorcraft FG-800-A engine fuel filter , all engines , without flex fuel )
We recommend every 30,000 miles.