up to 2.300 PSI
To provide an answer to this question the pressure of the fluid applied at the input end of the pipe must be provided.
depends on the pressure pushing through the pipe
depends on the pipe like if its copper its rated at 300 psi 200 degree F pvc is rated at 200 psi schedule 40 if its black poly it would be 200 psi most all pipes have it on the side of the pipe ,pressure and degrees.
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
up to 2.300 PSI
That would depend on the temperature /pressure as the coeffient of expansion per degree
Use a lead-free silver solder. It is the only thing that can handle the pressure and bond with the copper pipe.
depends on liquid/gas and pressure. natural gas and high pressure = lots thick oil and low pressure = no much
To provide an answer to this question the pressure of the fluid applied at the input end of the pipe must be provided.
Assuming the 6" refers to the radius of the pipe, it will hold approx 294 US gallons.
A hatchet copper? The only thing that comes to mind is a clip that is used to hold copper pipe up. It is driven into wood and has a curved section to support the pipe. A copper hatchet or brass hammer is used when you do not want to damage what you are hammering.
it is the low pressure side
This depends on the size of the copper pipe and what class it is. For example, copper pipe half inch class 0 and copper pipe class 3 have a wide weight difference because the wall of the class 3 copper pipe is much thicker.
It depends on how much each pipe can hold. And how long each pipe is.
4inch Schedule L Copper pipe weights 5.38 lbs/ft.
60 to 70 psi depends up on copper pipe length