Want this question answered?
Running Pressure
a furlong
You can lift a locomotive or a house with 1 psi, if the pressure is applied over a large enough area.
around 1000 dollars for parts and then another 1-2 thousand for labor
Assuming you need a metric ton, that's 1000 kilograms. To lift that, you need a FORCE of 9800 newtons. Force is related to pressure by: pressure = force / area, so the answer to the original question would depend, over what area the force is applied.
M stands for a thousand. and CF - cubic feet. MCF - thousand cubic feet, thus MMCF - thousand of thousand cubic feet which is just million cubic feet
Any air pressure is sufficient, if you have enough area with that pressure applied. Foe example, you could lift a 10000 pound truck with 10000 psi, if you have one square inch being acted on; you could do it with 1 psi, if you had 69.5 square feet being acted on.
Running Pressure
a furlong
about 5000 thousand mm.
You can lift a locomotive or a house with 1 psi, if the pressure is applied over a large enough area.
i will hurt is all i can say
29 thousand feet
It depends on which Jeep you are talking about and how high you want to go. Anywhere from $100 for a body or spacer lift up to several thousand dollars for a long arm 6" suspension lift.
My son can lift and carry 25lbs... though he's really big for a four year old.
Approximately 15 cubic feet of Helium.
There are many different costs for a person to have a Minivator lift installed in a home. The cost can range anywhere from 1000 dollars to a couple thousand dollars.