Inches are a measure of length, and gallons is a measure of volume.
However, volume can be measured in units of length cubed (because, for instance, the volume of a cube is the length of each side cubed).
The are 231 cubic inches (or in3) per gallon.
It depends on how deep the water is over the area it covers. 1 gallon = 231 cubic inches. If the water is 1 inch deep, it can cover an area of 231 square inches. If it's 231 inches deep, it can only cover an area of 1 square inch.
Inch is a unit of length, gallon is a unit of volume. You don't convert one to the other. Cubic inches perhaps, but not inches.
Inches are not in any way compatible with gallons.
A gallon is one possible measure of volume. The question does not make sense.
One gallon = 231 cubic inches
Find a container with gallon gradients (lines) at 1 gallon and 2 gallons. Fill the container with one gallon of water. Now add the plums until the water level reaches the two gallon line. Remove the water, and you now have 1 gallon of plums.
You didn't provide enough information to fully answer this question. Volume requires 3 dimensions, and you provided 2 (or didn't fully explain the 3rd). To determine volume, you need length, width and height LxWxH=Volume. I'll explain how to solve this math problem the best way I can. 1 gallon = 231 cubic inches http://www.onlineconversion.com/volume.htm Now that you know there are 231 cubic inches per gallon, determine the volume of water you need in inches. I'm going to guess you were meaning the tube is 12 inches long and either a 4 inch diameter. Volume of a cylinder can be acheived by multipling the area of the base times height. Assuming your cylinder is a perfect circle with an inside diameter of 4 inches, the base would be PI * r2 or 3.141592 * (2*2) or 12.535668 inches square. Multiply this times the height (12), and you'll get the cubic inches required to fill the cylinder...or 150.796416 cubic inches. Divide by 231 (cubic inches per gallon) equalling .6528 US gallons required to fill the tube.
the water will over fill
You first dump the 5-gallon pail, then fill the 5-gallon pail from the water from the 8-gallon pail. Then you dump the 5-gallon pail again, and you are left with 2 gallons in the 8-gallon pail.
120 ounces
16 halfpint cartons of water are needed to fill the gallon container
.21 yards of sand will fill an area 115 inches by 67 inches to a depth of 2.5 inches.
Instructions: 1. Fill the sprayer tank with half gallon of water. 2. Add Relegate and fill the gallon with another half gallon water. 3. Apply immediately. And do not store.
you fill the five gallon then dump three of that into the three gallon so you have 3 in the 3 and 2 in the 5 then you dump out the three and fill the 3 with the remaining two gallons and fill the 5 completely so you have a combined 7 gallons.
Notation: ( x , y ) where x is the amount of water in the 3-gallon container and y is the amount of water in the 5-gallon container1. Fill the three-gallon container ( 3 , 0 )2. Pour the three gallons into the 5-gallon container ( 0 , 3 )3. Fill the three-gallon container ( 3 , 3 )4. Fill the five-gallon container with the three-gallon container, leaving 1 gallon in the three gallon container ( 1 , 5 )5. Pour out the water from the five-gallon container ( 1 , 0 )6. Pour the water from the three-gallon container into the five-gallon container ( 0 , 1 )7. Fill the three-gallon container ( 3 , 1 )8. Pour the water from the three-gallon container into the five-gallon container ( 0 , 4 )Another great answer here:[See below for the related link]
you fill the 7 gallon jug and then place the water into the 5 gallon jug. You will end up with 2 gallons because you subtracted 5 gallons, place that water somewhere else and repeat the process.
you can fill 16 full containers and have some water left over
1. fill 3 gallon 2. pour that into 5 gallon 3. fill 3 gallon 4. from 3 gallon pour enough (2 gallon) to fill 5 gallon then empty 5 gallon 5. there will then be 1 gallon (3 - 2 = 1) in 3 gallon which is poured into 5 gallon 6. fill 3 gallon and pour it into 5 gallon, making result of 1 + 3 = 4 gallon in 5 gallon jug.
That depends on where you are and the price of water in your particular locality.
Easy. Fill the 7gal pail to the full mark (7 Gallons) with water. Then pour, from the 7 gallon pail, water into each of the 3 gallon pail up to the full mark. The remaining water left in the 7 gallon is 1 gallon. Pour this gallon into the aquarium. Fill the 7 gallon pail with water, again to the full mark, and then add to the aquarium. 1 Gallon + 7 Gallons = 8 Gallons.
6 inches = 1/2 foot(40-ft x 20-ft x 0.5-ft) x (12 inches per foot)3 / (231 cubic inches per gallon) = 2,992.2 gallons (rounded)
# Fill the 4-gallon jug with water then put it in the 9-gallon jug. # Repeat this step. The 9-gallon jug now has 8 gallons. # Fill the 4-gallon jug a third time, but pour only enough into the 9-gallon jug to fill it completely with no overflow. # The 4-gallon jug now has three gallons. Put that water aside safely, then repeat 1-3 for a total of six gallons.