answersLogoWhite

0

How much it costs to replace the camshaft seal will vary depending on where you have it done, and when. The cost of the part is inexpensive, the labor is what will make it expensive. If you do it at the same time that you have the timing belt replaced, it will be less. If you have it done on it's own, you should expect to pay about 400.00.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How much does it cost to replace rear main seal?

350.00


Cost of front crank shaft seal replacement?

Cost of a crank seal leak repair


Do you have to change the drive shaft when you replace the drive shaft oil seal on a 2006 Nissan navara?

No you do not.


How much does it cost to replace the main seal on a 1994 Nissan Sentra?

1,325


How replaced transmission seal my Tahoe?

Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.


What would cause a crank seal to leak on a 1990 Mitsubishi montero ls 3.0 liter v6 engine?

AnswerCheck the crank pully bolt. If it has come loose you will have a leak.The crank pully bolt does not have anything to do with the crank shaft seal leak. Thebolt is independent of the seal. To replace seal remove crank shaft pully and you will have access to crank shaft seal, pull out & replace seal.


How much does it cost to replace transmission seal on 1999 gmc Yukon?

It would depend on which seal. There are several seals. Some are easy to replace while others are difficult.


How much does a plumber cost to replace wax seal on toilet?

depending on your area, $80.00 on up.


How do you change the shaft seal on the air conditioner compressor on a Chevrolet Silverado 2000?

Usually the shaft seal is installed from inside the compressor housing and is not serviceable. You would need to replace the compressor.


How much does it cost to replace a rear main seal in a GMC Yukon XL?

Oh, a lot; 4 figures. You have to completely break the engine down to replace a rear main seal.


How do you fix 2003 expedition rear differential pinion seal leak?

remove rear drive shaft. remove pinion yolk from front of diff.remove oinion seal replace with new one. replace pinion yolk, replace driveshaft,.. dhceck ujoints of drive shaft while out, its a good time to replace them


How do you replace the pinion shaft seal on your F-350 dually?

to replace pinion shaft seal you need to drop the drive shaft from the rear end then with large socket remove pinion nut from front of yoke remove yoke remove old pinion seal install new pinion seal reinstall yoke and pinion nut to specified torque re install drive shaft note now is the time to check and see if U-joints need replacing