answersLogoWhite

0


Best Answer

Air weighs 1.2g per cubic metre at 20deg Celsius and at sea level.

With different temperature or pressure, the density of air is:

d = p / (R x T)

d is the calculated density of air

p is the pressure

R is the specific gas constant (287.05)

T is the temperature.

With differing altitudes and any water vapour (humidity), the weight of air varies in a much more complex fashion.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
User Avatar

Anonymous

Lvl 1
3y ago
Incorrect answer
More answers
User Avatar

Wiki User

10y ago
Weight of cubic meter of waterA cubic meter of pure water at four degrees Celsius has a mass of 1,000 kilograms, or one tonne (a metric ton). The temperature of the water is significant because the density of water varies with temperature. It is at its densest at four degrees Celsius.

One thousand kilograms is equivalent to 2,204.6 pounds (lb) or 1.1023 US tons.

The density of pure water is slightly less than 1000 kg per cubic metre at 4 deg C and less than that at other temperatures. So the mass of a cubic metre is only approximately 1 tonne. But that is not its weight. The weight, on the surface of the earth, is 9,800 Newtons.
1 cubic metre of pure water weighs 1000 kilograms or 1 tonne.

This answer is:
User Avatar

User Avatar

Wiki User

8y ago
According to the CRC Handbook of Chemistry and Physics, the density of dry air at 20 degrees C at 760 mm of mercury (one atmosphere of pressure) is 1.204 milligrams per cubic centimeter.1 cubic foot = 28,316.8467 cubic centimeters.

So, dry air weighs 34,093.48 mg per cu.ft.

Which is about 1.2 ounces per cu.ft.

Observation:I think the above is what you would find if you weigh the air in a vacuum (the air is in a container of known weight, and the container is being weighed in a vacuum). The above was probably determined with knowledge of physics and mathematics, but the idea is the same. Practically speaking on earth's surface, at 20 degrees C and one atmosphere, the air would weigh nothing at all; perhaps more accurately the air 'weighs' its own displacement in the air itself. It would be perfectly buoyant. Think about weighing 1 cubic foot of lake water, with the water completely submerged under the surface of the lake... quite a different result from weighing it on dry land. Unless you are studying buoyancy, it might be more useful to use things like atmospheric pressure, or the mass of a sample of gas and its temperature and pressure within the sample, depending on your need. The question demonstrates the importance of knowing the standard conditions (stp) used in research. There is no universally established set of standard conditions, so attention is absolutely necessary. See discussion. Follow-up to observation:If you had a container with a volume of one cubic foot and evacuated it, it would weigh less than if it were full of air at standard temperature and pressure. You would not need to weigh it in a vacuum, unless its weight in vacuum is what you want.

By comparing the weights of the evacuated and the full container, you can determine the weight of the air, essentially, in a vacuum. The weight of the air "in air" remains zero. This seems odd, because we are weighing the container "in air", and the weight goes up when we add the air. I think this does not mean that the air weighs something as it hangs out in the air. [see discussion]

I think what is happening is that the observed weight of the perfectly evacuated container at one atmosphere will be less than the weight of the container itself, because to find the container's weight we would need to subtract the weight of the volume of air the whole container is displacing. So putting mass into the container serves the purpose of bringing us closer to the weight of the container, and doesn't demonstrate that the air has weight while suspended in itself. [see discussion]

Any chemist will tell youthat the molar volume is 22.4 liters at STP - Standard Temperature and Pressure (1 atmosphere, 32 F). The mass of a mole is equal to the molecular weight of the molecule it's made of, multiplied by 1 gram.

Air doesn't have a standard definition as to composition, but it's generally about 78% nitrogen, 21% oxygen, and 1% other stuff. Since nitrogen has a molecular weight of about 28 and oxygen has a molecular weight of about 32, the molecular weight of air is about 28.8 and a mole has a mass of 28.8 grams.

Dividing 28.8 grams into 22.400 liters, you get 1.286 grams per liter, which isn't far from the 1.2 grams per liter quoted above, which is not at STP.

Arguing that air "weighs nothing" in ordinary conditions ignores the fact that air may be used to displace other fluids, and ignores the fact that air's weight gives air momentum.

Or consider the lift of a hot air balloon. If the temperature of the air in the balloon is 200F and you are ballooning on a winter morning when it's 40 out, how much lift does the balloon produce. You need to use absolute temperatures so adjusting to Rankin scale, the air inside the balloon only weighs 499/659 as much as the air outside the balloon. That's about 75% as much - and so the lift of that balloon is about 25% of the weight of the air that would normally be in that balloon. Hmmm. A back-of-the-envelope calculation reveals that 25% of nothing is still nothing - and yet hot air balloons DO rise.

One might as well assert that you only weigh 85 pounds, because you're only 85 pounds over the Metropolitan Insurance tables, but you'll still have to buy your clothes in the Big & Tall store.

This answer is:
User Avatar

User Avatar

Wiki User

16y ago

One could argue that air has no weight, but it does have mass. At sea level and at 20 °C, dry air has a density of approximately 1.2 kg per cubic meter. Moisture actually makes it just a bit lighter. Dry, very cold air is the densest.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

5280 X 5280 X 5280 = Cubic feet in a cubic mile == 147,197,952,000

One pound of air = 12.3609 Cubic feet of air, at sea level.

Then divide 147,197,952,000 by 12.3609 = 11,908,352,300 = lbs. of air

per cu. mile, at sea level.

Standard atmospheric pressure is 14.7 lbs per sq./inch at sea level.

Square inches in a square mile , 5280 X 5280 X 144 = 4,014,489,600 sq.in./sq.mile

Air press per sq. mile = 4,014,489,600 X 14.7 = 59,012,997,120 lbs. press per sq/mile.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

1.28kg

http://www37.wolframalpha.com/input/?i=mass+of+one+cubic+meter+of+air

This answer is:
User Avatar

User Avatar

Wiki User

10y ago

0.0014 to 0.0015 pound weight per cubic inch.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

What is the question.

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

Mass is 5280^3 x 0,0807 lb/cuft/2000 lb/ton = 5,939,427 tons, or about six million tons per cubic mile at sea level pressure and density, but obviously less with altitude. Atmospheric density is about half of sea level density at 18,000 ft.

This answer is:
User Avatar

User Avatar

Anonymous

Lvl 1
3y ago

in meter

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much does 1 cubic mile of air weigh?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much does 0.4 cubic feet weigh in pounds?

More info needed. How much does 0.4 cubic feet of what weigh? Air? Lead? Water? Dirt?


How much does one cubic meter weigh?

One cubic metre of what? Air weighs almost nothing; one cubic metre of osmium would weigh more than 22.6 tonnes.


How much does 100 cubic feet of air weigh?

According to the related link, PHYSLINK.COM, "1 cubic foot of air at standard temperature and pressure assuming average composition weighs approximately 0.0807 lbs". The weight of air is highly dependant on the air temperature and barometric pressure.


What is the weight of one cubic mile of air at 70 degrees?

7000


Is weight influenced by the force of volume?

No. Not at all. Volume has no force. Put 1 cubic foot of air inside a sealed jar, and weigh the air. Now let the same air into a 10-cubic-foot jar; seal the jar, and weigh the air again. The air has 10 times the original volume, but it still has exactly the same weight.


What is the equivalent of 0.0175cu.m in weight?

A cubic meter is a unit of volume, not weight. You would also need to know the density of the substance. For example 0.0175 cubic meters of water will weigh much more than the same volume of air.


Can someone help you convert 1270 cubic meters to tons?

Cubic meter is a unit of volume and ton is unit of weight. You are asking how many tons does 1270 cubic meters of something weigh, but you do not say what that something is. For example 1270 cubic meters of air would weigh much less than the same amount of iron .I will tell you that 1270 metes of waters weighs 1341.99402 tons .


How much heat is contained in 1 cubic meter of air?

That depends on the mass, pressure, and temperature of the air in the cubic meter.


Weight of river sand 100 cubic feet?

It all depends on what you have in the cubic feet. -- If the cubic feet are full of air, they weigh about 8 pounds. -- If they're full of water, they weight about 6,243 pounds (3.1 tons). -- If they're full of lead, they weigh about 70,793 pounds (35.4 tons). -- If the cubic feet are completely empty, they weigh exactly zero.


How much does 1 cubic yard weigh?

That depends on what objects or substances are in the cubic yard. -- If it's full of air, it weighs about 2.15 pounds (if there's no other air around it). -- If it's full of water, it weighs about 1,688 pounds. -- If it's full of gold, it weighs about 32,063 pounds. -- If it's an empty cubic yard, it has no weight at all.


How much air does the average person breathe a day?

288 cubic feet of "air" or 19 cubic feet of pure oxygen .


How much flotation does a cubic foot of air have?

Everything I can find says that a cubic foot of air can lift about 62-63 lbs.