1 of 5
Measure the diameter of your table.
2 of 5
Add the diameter of the table to twice the table's height if you want a floor-length tablecloth.
3 of 5
Add the diameter of the table to twice the desired length if you want a shorter tablecloth. (Measure the distance from the edge of the table to the desired length.)
4 of 5
Add 1 1/2 inches to your measurements to allow for a 3/4-inch hem around the bottom of the tablecloth.
5 of 5
Use this figure for both length and width of the material you will need.
3 yards -oblong of course
they come in 45 or 60 width so keep that in mind
answer it for me
No it will not fit. It will sit on the table like a large, odd-looking place mat. Tablecloth measurements refer to the exact size of the table cloth, not to the size of table it will fit. For a 96 inch diameter round table, you'll likely need a 120 inch diameter tablecloth to allow for 12 inch overhang all the way around. You can use a 108 inch round, which will give you a 6 inch drop or 120 inch round, which will give you a 12 inch drop or 128 inch round, which will give you a 16 inch drop
One can buy a 90 inch round tablecloth online when one goes to the website of Linen Tablecloth. Price starts at $10. The most expensive one is only $20.
84 inches round tablecloth gives a drop of 12 inches for 60 inch round table. If you want the drop up to the ground,120 inches round tablecloth is perfect fit. (above tablecloth sizes is applicable only to the std height table 29 inches)
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
Yes. It would leave 12 inch of overhang all around.
4 square feet are needed
You need at least 4 yards of fabric to make a 70 inch round table cloth. Most people would use close to 6 yards to make the designs that they'd like to.
No because a round table with a circumference of 60 inches has an area of just over 286 square inches.
If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.
Cut a piece of fabric so that it is 2 inches longer and 2 inches wider than the tablecloth you want to make.Then iron each side under 1/2 inch, and then repeat. This should be folded towards the wrong side of the fabric, adn cover the unfinished edge of the fabric.Then, sew along each folded edge of the fabric, 1/4 inch from the edge.
To make a 60" round tablecloth, you must first select the fabric desired. Fabric comes in widths, 36", 48" 60". If you buy 60" fabric, you would need 1 2/3 yards, if the fabric is 45" you will need double the length or3 1/3 yards.
Table linen size will depend on the drop you need. For a 5 foot diameter (60 inch) ROUND table and using a 90 inch ROUND tablecloth your drop would be 15 inches all around the table. For a 5 foot diameter (60 inch) SQUARE table and using a 85 inch SQUARE tablecloth your drop would be 12 and a half inches all around.