275 hp's to the wheels on my suburban
Should be about 115 The 2.8 multi-port was redesigned in 1987 it had increased bore and stroke. The horsepower was increased from 120hp to 130hp as of 1987.
The power rating when it was new was approximately 235-240 hp
Displacement (750cc) is not directly translatable to horsepower, there are to many factors involved; carbureted, fuel injected, type of fuel etc.
I had a 1991 and it was rated at 225 horsepower at 4200 RPM and 300 ft-lbs torque at 3200 RPM from the factory , I believe the 1990 was the same
No, 1990 1.6s are MPFI,(multi port Fuel injected) or fuel injected, and 1.5s are DPFI (dual point fuel injected) throttle body injected, they are completely different injectors, one motor has one for each cylinder, the other style has two for the whole motor, Injector cleaner can be used to clean injectors Searching for answers like this is much easier and faster from any search engine
depends if it is carburated of fuel injected, carb has 105, and the fuel injected has 135
The cost of 5.7 350 fuel injection for horsepower is approximately $200.
It doesnt. Horsepower depends on a lot of things. Displacement is just one. Other factors include RPM, cam, valve size, normally aspirated or turbocharged, fuel, carbureted or injected, etc. Could be anywhere from 5 to 12HP or more.
Anywhere from 62-67. With that taxes paid (new slip-ons, air cleaner), 70-73. These figures are at the rear wheel of course.
The 350 cc Honda has a horsepower rating of 60 horsepower. The horsepower can be adjusted by adjusting the fuel injection screw.
It if fuel injected and does not have a carburetor.
140 H.P.