0
To calculate the horsepower required to lift 800 pounds at a speed of 200 feet per minute, you can use the formula: horsepower = (weight in pounds × height in feet per minute) / 33,000. Plugging in the values, it would be (800 × 200) / 33,000, which equals approximately 4.85 horsepower. Thus, it takes about 4.85 horsepower to lift 800 pounds at that rate.
What else can I help you with?
How many foot pounds does it take to lift 1500 pounds 60 inch?
To calculate the foot-pounds required to lift a weight, multiply the weight in pounds by the distance in feet. In this case, lifting 1500 pounds a distance of 60 inches (which is 5 feet) would require 1500 pounds * 5 feet = 7500 foot-pounds of work.
Macho mel can lift 200 kilograms with ease how much is this in pounds?
Macho Matt can lift 200 kilograms with ease. How much is this in pounds?
How much horsepower is needed to lift 220 lbs 30 inches in 10 seconds?
1 horsepower = 550 foot-pounds per second 30 inches = 2.5 feet (2.5) x (220)/10 = 550 foot pounds per 10 seconds = 1/10th of a horsepower.
What if you are 64 pounds how many balloons would it take to lift you?
Assuming one party balloon can lift about 14 grams, it would take approximately 129 party balloons to lift 64 pounds. However, this is a rough estimate as variables such as balloon size, air temperature, and altitude can affect the lifting capacity.
How heavy was the Saturn 5 rocket on lift off?
The Saturn V rocket weighed about 6.2 million pounds (2.8 million kg) at lift-off.
How much helium is needed to lift 400 pounds?
To lift 400 pounds, you would need approximately 74.3 cubic feet of helium. Helium is lighter than air, so it provides lift when contained in a balloon.
How many foot pounds does it take to lift 1500 pounds 60 inch?
To calculate the foot-pounds required to lift a weight, multiply the weight in pounds by the distance in feet. In this case, lifting 1500 pounds a distance of 60 inches (which is 5 feet) would require 1500 pounds * 5 feet = 7500 foot-pounds of work.
How much weight does an automotive lift hold?
It depends on the model and the needs of the lift owner. Some lifts are designed for buses and can hold 64,000 pounds and raise them in less than a minute!
What is the cost of a personnel lift?
The cost of a personnel lift that can lift 2 people up to 400 pounds about 30 feet is going to be around $1,500.00 for a refurbished to about $6,000.00 for a brand new one and the is a scissor lift.
How much word is needed to lift 80 pounds table vertically a distance of 5 feet?
That takes 80 foot-pounds, equivalent to about 59 joules.
Where can you buy Athena 7 Minute lift in Canada?
Where can you purchase Athena 7 minute lift in Ontario, Canada
How many pounds of lift does a gallon jug lift in water?
About 8.4 pounds.
How do you properly lift 30 pounds?
To properly lift 30 pounds, start by standing close to the object with your feet shoulder-width apart. Bend at your knees and hips, keeping your back straight, and grasp the object firmly. Use your leg muscles to lift, straightening your legs while keeping the load close to your body. Avoid twisting your torso; instead, turn your feet to change direction if needed.
What is the horsepower of the pump if the height is 75 feets?
we still need the flow volume required, and the type of fluid to answer this question. But essentially, how much energy (in ft lbs per minute in this case) will it take to lift the appropriate number of foot pounds of fluid in 1 minute. Get the foot pounds for 1 horsepower.
How much should you lift if you weigh 110 pounds and you are 5 feet 4 inches and you are 13 years old?
an i-pod should be enough for you
How many horse power is required to lift a load of 600 pounds 12 feet high in 5 second?
Approx 2.62 hp
How much pressure is needed to lift water 35 feet?
To lift water 35 feet, you need approximately 15.2 psi (pounds per square inch) of pressure. This is calculated using the formula that 1 psi can lift water about 2.31 feet. Therefore, dividing 35 feet by 2.31 gives you the required pressure. Keep in mind that additional pressure may be needed to overcome friction losses in pipes or fittings.
