0
A servo is basically a regular DC motor, with the output shaft feeding into a potentiometer, which is in turn connected to some control circuitry. The control circuitry compares the output of the pot with a control signal, and makes the motor move so that the output of the pot will match the control signal.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Do the brakes still work without the servo?
There are several types of brake servo and are we talking about unbolting it and throwing it away or do you mean if the servo is eleminated from the system? Most brake systems will work if the Brake Booster servo does not work. No braking system will work if you unbolt the servo and throw it away.
Can drum brakes be servo or non servo?
They are either servo type or non servo type, they can't be both types.
What is a Micro Servo?
A micro servo is a small servo. The term can be used to describe any servo that is smaller than a "typical" servo. For example a servo that is about 1.5" x 1.5" x 0.5" would probably be called a micro servo. Most servos use the same signals and voltages, so usually a micro servo can be plugged into any servo controller or radio receiver that a regular servo can be plugged into.
What is the birth name of Piero Servo?
Piero Servo's birth name is Servo, Giampiero.
What is brake servo?
A brake servo is a servo that is used for brakes That's all folks
What does the Finnish word servo mean?
Servo in Finnish is a loan-word from the English word servomechanism or servo.
What the different between the servo brake and non-servo brake?
why are air brakes considered non-servo
What is dual brake servo?
Servo brakes x2
What you mean by servo in servo motor?
The servo motor is a type of motor which acts according to the command of the user. which serves the purpose of the user. therefore it is called as "servo" motor
Can we use servo way 68 instead of servo system 68 in hydraulic power pack?
No. Servo system 68 is hydraulic oil and servo way 68 is lubricant
Is it possible to control an electric motor with a servo or servo connector?
NO
When did Marty Servo die?
Marty Servo died in 1969.
