0
A normal microphone does that.
It converts sound energy to electrical energy this energy level is used as an output using same energy level amplified or it could be used to record those same energy output and pattern too be played again.
But sound has such a small amount of energy as energy loses are very high that you seriously can't produce a power plant that works on sound.
Wiki User
∙ 8y ago
Wiki User
∙ 16y agoIt has been calculated that one big cheer from the spectators in a football stadium has enough energy to boil a cup of water. Now, although heating water takes quite a bit of energy, this actually isn't very much from so many people. A microphone works by sound vibrations moving a coil past a magnet. The output from the microphone will be around 10mV and is capable of delivering a few milliamps. In other words, not very much energy at all. This is the problem with converting sound energy - there is very little of it concentrated in a specific area to capture and therefore it is hard to get enough power to light up even the smallest light. There are optically active materials that glow when they are vibrated or hit. Material of this type might begin to glow faintly if it is placed in a strong sound field. Even so, this conversion still requires a lot of sound energy and is probably not the next big green energy idea.
Wiki User
∙ 11y agoI have an idea to produce more sound which can cause more distrubance so that electricity can be produced easily.
First we have to record the sound and place it ina vaccum(glass box where air cannot pass through it.Then play the sound a little bit of noise can be heard by our human ear.
Then attach a psethescope head to it to produce more sound two ends are connected to a speaker where we have too produce current.So, I think this will help you people to move forward
Thank you alot to read this article.................
----->Harish san
so try this at home and produce noise.....................
Wiki User
∙ 13y agoSound contains a common computer language called binary. This code consists of on and off switches or 1's and 0's, 1=on 0=off. When you speak into a microphone it takes this code and makes it into electrical signals which can the be transmitted through the airwaves or to a speaker. Binary is a universal language that can be used in many applications, even what you see on your screen is made possible by binary code.
Wiki User
∙ 12y agoThe sound vibration is typically used to cause a tiny magnet to move in a tiny
coil of wire. As we know, a magnet moving in a coil of wire produces a voltage
between the ends of the coil.
A good example of such a device is the one known as a "microphone".
Another good example used to be the "phonograph cartridge", but there's
hardly anybody left who knows what those are.
Wiki User
∙ 11y agoAs longitudinal waves fall on the diaphragm it vibrates to and fro. This is in attachment with a coil which surrounds a magnetic material. So as the coil vibrates then magnetic flux linked with the coil changes and so emf is induced due to electro magnetic induction. This is how sound energy is changed into electrical energy
Wiki User
∙ 16y agoBasically this is the process of the operation of a microphone. By vibrating a membrane via sound waves through a magnetic field it produces electrical energy .
Wiki User
∙ 12y agoA speaker transforms electrical energy to sound energy, through electromagnetic motion, motor effect.
Wiki User
∙ 13y agoYou could run it through a microphone.
Add your answer:
Earn +20 pts
What is the energy transformation of megaphone?
Electrical energy gets converted to sound energy. When we speak into the speaker, our sound waves get converted into electrical signals. These signals get amplified and emitted as louder sound. Thus, electrical energy (electrical signals) gets converted into sound energy (amplified/louder sound).
What is the process in which sound energy is converted into electrical energy?
Sound energy is converted into electrical energy through a device called a microphone. When sound waves hit the microphone's diaphragm, it vibrates and changes the mechanical energy into electrical signals. These electrical signals represent the sound waves and can be amplified and recorded for playback.
Are various energy forms interconvertible?
Yes, various forms of energy are interconvertible. Look at the following examples. Sound energy is converted into electrical energy in a microphone. Electrical energy is converted into sound energy in a loud speaker. Electrical energy is converted into mechanical energy in a motor. Mechanical energy is converted into electrical energy in a generator. Potential energy is converted into kinetic energy when a stone is dropped. Electrical energy is converted into heat energy in a room heater. Chemical energy is converted into sound, light and heat energy while firing crackers
What are the main energy changes in a loudspeaker and microphone?
In a loudspeaker, electrical energy is converted into mechanical energy to produce sound waves. In a microphone, sound waves cause a diaphragm to vibrate, converting the mechanical energy into electrical signals.
What electrical energy is converted to another form of energy?
Electrical energy can be converted into many forms of energy, such as mechanical energy in electric motors, light energy in light bulbs, heat energy in resistors, and sound energy in speakers.
What is the energy transformation of megaphone?
Electrical energy gets converted to sound energy. When we speak into the speaker, our sound waves get converted into electrical signals. These signals get amplified and emitted as louder sound. Thus, electrical energy (electrical signals) gets converted into sound energy (amplified/louder sound).
Are various energy forms interconvertible?
Yes, various forms of energy are interconvertible. Look at the following examples. Sound energy is converted into electrical energy in a microphone. Electrical energy is converted into sound energy in a loud speaker. Electrical energy is converted into mechanical energy in a motor. Mechanical energy is converted into electrical energy in a generator. Potential energy is converted into kinetic energy when a stone is dropped. Electrical energy is converted into heat energy in a room heater. Chemical energy is converted into sound, light and heat energy while firing crackers
What is the process in which sound energy is converted into electrical energy?
Sound energy is converted into electrical energy through a device called a microphone. When sound waves hit the microphone's diaphragm, it vibrates and changes the mechanical energy into electrical signals. These electrical signals represent the sound waves and can be amplified and recorded for playback.
In electric bell electric energy is converted into which type of energy?
In an electric bell, electric energy is converted into mechanical energy to produce sound. This is done through the electromagnetic force acting on the metal clapper to strike the bell and create the ringing sound.
How do sound systems work?
A sound system works by converting sound waves into electrical energy. The electrical energy is then converted back into solid energy that results in sound.
Can sound energy converted into dc electrical output If it may please give me brief reasin of working?
No, the sound energy cannot be converted into DC electrical output.
How electrical energy is converted into sound energy?
Electrical energy is converted into sound energy through a process involving an electrical signal passing through a transducer, such as a speaker or a buzzer. The electrical signal causes the transducer to vibrate, which in turn creates sound waves that we perceive as sound. This conversion process allows us to hear the audio produced by devices like speakers, headphones, and microphones.
What form of energy is produced in a radio?
kinetic converted to electrical.
What is the name of the process in which sound energy is converted into electrical energy?
The process is called "sound-to-electricity conversion" or "acoustic-to-electric conversion." Sound waves are captured by a transducer, such as a microphone or piezoelectric sensor, which converts the mechanical energy of the sound waves into electrical signals.
For radio broadcasts sound signals are converted to?
For radio broadcasting, sound waves are converted to electrical waves that are further transmitted. This transformation is done by a device called a transducer, which converts physical parameters into an electrical form (signals).
What type of energy conversion takes place in a doorbell?
Kinetic energy from the finger is converted to electrical energy when the button completes the circuit. Then when the electrical energy reaches the bell it is converted into sound energy.
What energy does an electric fan use?
An electric fan uses electrical energy to operate. The electricity powers the motor inside the fan, which rotates the blades to create airflow.
