Strong enough to deliver 100,000 joules of energy every second,
if there's a place to put it all.
power in equals power output plus power loss so input power for this question is 100 kw now use efficiency formula 100/80 times 100 to get 80% efficient
There are 74.57 kilowatts in 100 Horsepower.
-- 80% of 100 kilowatts = 80 kilowatts-- Ignoring the power factor, 80 kilowatts is supplied from a 220-volt sourcewhen the current is 3637/11Amperes. (rounded)
200 kilowatts is a small amount compared to the reactor's design output, but this would produce about 70 kilowatts of electric power
360 kilowatts would power about 1000 TVs, indefinitely. If 360 kilowatts of power were used, the energy used in 1 hour would be 360 kilowatt-hours.
less than 100 kilowatts of electricity can be used to power a single home.
There are 1,000 kilowatts in a single megawatt. These are measures of electrical power which are based on the metric system.
A three wire home distribution service rated at 100 amps has a wattage capacity of;From L1 to L2 at 240 volts x 100 amps = 24000 watts or 24 kilowatts. From L1 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts. From L2 to neutral at 120 volts x 100 amps = 12000 watts or 12 kilowatts.
If a dynamo puts out 100,000 kilowatts and the area it services only requires 80,000 kilowatts; then the remaining 20,000 kilowatts is known as its residual power. This extra capacity is useful in withstanding power spikes when consumer demand increases during peak periods.
52025.54521
The formula is Kilowatts = I x E x 1.73 x pf/1000.
The Watt is the fundamental unit for power in the mks unit system of measurements. Kilowatts = 1000 Watts; so engine Kilowatts are the units used to measure the power of an engine. Truth be known, though. Kilowatts are more likely used for electric motors than they are for internal combustion engines. A common unit for engine power is horse-power (HP), but 1 HP = 746 Watts. So Watts can be used to measure engine power as well.