0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do tosters work?
they just work they just work,work,work
The work you do on a machine is called work?
the work a machine does is the work outputwhat it takes to do the work is the work inputSources;The_work_that_the_simple_machine_does_is_called_the_work
The work that the simple machine does is called the work?
the work a machine does is the work output what it takes to do the work is the work input
Work performed on a machine?
The work done by a machine is called work output
The work done by a machine is called work?
work output
What is the application of demultiplexer?
A demultiplexer is an electronic device that separates a multiplex signal into its component parts. It is used when a circuit wishes to send a signal to one of many devices.
What are the application of demultiplexer?
Demultiplexing, or separating several previously multiplexed signals.
What is Demultiplexer in Digital Logic Design?
45A demultiplexer is the opposite of a multiplexer. In electronic devices, a demultiplexer is a logical circuit which takes a single input and sends out this input to one of several outputs available. During this process the output that has been selected is assigned the value 1, while the other outputs are assigned the value 0. The definition is slightly different when we are talking about demultiplexers in the context of networking. In the networking context, a demultiplexer is a device that receives multiple signals that have been transmitted on one line and then decodes these single line signals into separate multiple signals. A demultiplexer is usually always used in tandem with a multiplexer. Demultiplexers can be analog demultiplexers or digital demultiplexers. Digital demultiplexers generally function as decoders.
What is the application of demultiplexur?
They find use in Clock demultiplexer,Security monitoring system,Synchronous data transmission system
Why is Synchronization a problem in data communication?
synchronization between the multiplexer and demultiplexer is a major issue in data transmission. if the multiplexer and demultiplexer are out of synchronization a bit belonging to one channel may be received by the wrong channel. for dis reason , one or more synchronization bits are usually added to the beginning of each frame. these bits, called framing bit , follow a pattern, frame to frame, that allow the demultiplexer to syncronize with the incoming steam so that it can separate the time slots accurately. in most cases, this syncronization information consists of one bit
Function of demultiplexer?
A demultiplexer is a circuit. It has one input but more than one output. A demultiplexer gives binary information from one end to another. It is used to connect a single source to many destinations.
Introduction multiplexer demultiplexer?
A multiplexer, commonly referred as an input selector, is a circuit with many inputs but only one output: it has some data inputs, control inputs and one output, depending on the control inputs, one input from the data inputs is sent to the output .A demultiplexer is a circuit with one data input, few control inputs and many outputs, it is also known as output selector.
What is logic connections?
According to DIGITAL electronics logic connection can be defined as the combination of gates to realised a particular logic function. e.g decoder; multiplexer; demultiplexer etc
Why is it necessary to synchronize mutiplexer and demultiplexer in time division multiplexing?
It is necessary to synchronize the mutiplexer and demultiplexer in time division multiplexing because the multiplexor is encoding data onto the carrier at certain points in time. (This is why its called Time Division Multiplexing) The demultiplexor most know when the data of interest are present in the carrier, hence the need for synchronization. Note that there usually is a transmission delay between the multiplexor and demultiplexor. As a result, while the demultiplexor is in sync with the multiplexor, it is not necessarily in phase. The crucial point is that the data and clock be in sync and in phase at the demultiplexor.
What is the difference between multiplexer and demultiplexer?
A multiplexor is a device that takes two or more signals and encodes them on fewer (often, on one) wire. A demultiplexor is a device that reverse that process.
What's the difference of CWDM, DWDM and CCWDM?
How does WDM work? A WDM system uses a multiplexer at the transmitter to join the several signals together and a demultiplexer at the receiver to split them apart. There are multiplexer(MUX) and demultiplexer(DEMUX). The main function of MUX is to combine multiple signal wavelengths in one fiber for transmission at the sending end. And the main function of the demultiplexer DEMUX is to separate multiple wavelength signals transmitted in an optical fiber at the receiving end. The main purpose of wavelength division multiplexing(WDM) is to increase the available bandwidth of the fiber. Therefore, wavelength division multiplexing systems are widely used by telecom companies to expand capacity through WDM without laying more fibers. CWDM, DWDM, CCWDM, How to choose? CWDM is sparse wavelength division multiplexer, also known as coarse wavelength division multiplexer. CWDM is being used in cable television networks, where different wavelengths are used for the downstream and upstream signals. In these systems, the wavelengths used are often widely separated. DWDM is dense wavelength division multiplexer. Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550 nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band). CCWDM is a mini wavelength division multiplexer, which is a mini version of CWDM. A wavelength division multiplexing technology based on TFF (Thin Film Filter), which works in the same way as CWDM. The difference is that CCWDM uses free space technology, its package size is smaller and the insertion loss is lower. It can replace CWDM products in telecom, enterprise networks, PON networks, TV and other applications. The main advantage of the CWDM system is the low cost. The device cost is mainly manifested in filters and lasers. The wide wavelength spacing of 20nm also makes CWDM the advantage of low specification of the laser and simplified structure of the optical multiplexer/demultiplexer. The simplified structure and high yield will reduce the cost. The increased cost of DWDM is mainly due to the high cost of laser diodes and the cooling laser technology used to maintain wavelength stability. CWDM, DWDM and CCWDM are kinds of effective methods to solve the increasing bandwidth capacity needs; but they are designed to meet different network needs.
What is multiplex unit?
•Multiplexing means to break high-speed physical communication circuit into several lower-speed logical circuits so that many different devices can simultaneously use it. Multiplexing is a mechanism that allows multiple devices to share a single high-capacity link. The device which facilitates multiplexing is a multiplexer (MUX), which bundles the signals from the source nodes into the shared medium. On the other end, a demultiplexer (DEMUX), would split the bundled signal back to its intended nodes.
