Want this question answered?
A 305 chevy engine has a bore diameter of 3.736". Check the diameter of your L2256 piston to see if it is that size.
have a gunsmith do this, push a slug of close dia through the rifle, and micrometer the bullet. this will give the true bore size.
The bore is the inside of the barrel- that is, the hole that the bullet is fired through. The diameter of the bore is measuring how wide the bore is from one side to another.
In rifles and handguns the diameter of the bore usually indicates?
Bore slugging is done by taking a lead cylinder(slightly larger in diameter than bore) and pounding it through the bore. Once it's through, you mic it with a caliper. This gives the bore's exact diameter.
I am going to need to bore a larger diameter hole.
The bore of a gun relates to the diameter of the hole in the barrel - and in turn the diameter of the bullet the gun can fire.
diameter of the pipe
The bore of a cylinder describes is measurement, in millimeters or inches, of the inside diameter of the cylinder. The diameter is the width across.
The word "caliber" refers to the diameter of the internal bore of a gun or firearm barrel.
Orifice plates which are used in flow measurement are mostly concentric "square-edge" type. The bore of the orifice is not constant when one moves from the upstream side to the downstream side along the cross section. The bore size is constant for a few mm only and then expands till it reaches the downstream face. This inclined cut is called the bevel in an orifice. The main reason to have a bevel in the orifice is to avoid turbulence thereby providing more accuracy to the measurement. Restriction Orifice plates are not beveled since their intent is to reduce the pressure only.
bore diameter