96 on up you need a scanner, you can buy 1 at the auto parts place for around 100.00 dollars. actron hand held scanner to retreive trouble codes.
Body Control Module
To program the body control module (BCM) on a 1998 Chevy Malibu, you typically need a compatible scan tool that can communicate with the vehicle's onboard systems. Start by connecting the scan tool to the vehicle's OBD-II port, then follow the tool's prompts to access the BCM programming functions. Ensure the vehicle's battery is fully charged and follow any specific instructions for reprogramming the BCM, which may involve entering security codes or configuration settings. After programming, verify that all systems controlled by the BCM operate correctly.
where is the bcm located on a 2005 chevy cobalt
where is the bcm located on a 2005 chevy cobalt
the pcm is under dash on drivers side of car. there is also the bcm (body control) which is under the passenger side glove compartment.
Body Control Module
what does a bcm in a 2000 cavalier control
The BCM is under the glove box. There are two 9mm bolts that hold in the cover plate. The BCM is right above the fan bower motor
inside the center console - right side - the panel is held in with a velcro tab in the front. You will find the second of three fuse panels within - that is also the BCM.
i know its to do with a wire on the bcm, which is under the glove box, but i cant the right info online.. if its the same as 98 then you just gotta ground the blue wire on the center plug
The Body Control Module (BCM) on a 2005 Chevrolet Malibu is typically located under the dashboard on the driver's side of the vehicle. It is mounted near the steering column, often behind the trim panel. To access it, you may need to remove the lower dash cover.
san bernardino ca. on 3rd st