It happened to my 98 Chrysler tand c, I wound up taking the oil pan out and getting a new one. Good luck, there may be another way.
anyone in there right mind would not to remove breaks on a car. Really!!
There isn't one. Use the lower hose.
como se desactiva una alarma de caravan 96
inside the doors. you have to remove the inside door panels
It is a plastic valve on bottom of radiator, either on driver or passenger end of radiator, if you can not locate or handle breaks you may remove lower radiator hose to drain coolant.
You can't, You must remove the fuel tank to get to the fuel pump. The pump is inside of the tank.
Follow the upper radiator hose to where it meets the engine. Remove the two bolts of the thermostat housing and remove and replace the thermostat.
No you do not need to remove the bumper. You just need to remove the assorted hardware on top of the radiator including the metal rail - no need to disconnect the hood release cable, just lay the metal rail out of the way.
Drain the water from your Corvette radiator. Remove the radiator hoses. Remove the radiator stabilizing arm bolt. Remove the radiator retaining bolts. The radiator will come off.
Remove the water from the radiator. Remove the radiator hoses. Remove the stabilizing arm from the top of the radiator. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
you have to drain the antifreeze/coolant so it would be wise.
the lowering winch is operated by turning the nut accessable fromjust inside the liftgate.