0
If your drywall is in good shape and not soft, you can remove mold from your walls by simply mixing some bleach in a bucket with water and use a sponge to scrub it off. It might not be a fun solution, but it works very well. If the mold is over a large area and you know there was water damage, you should bring in a professional to remediate the mold and replace the wall. Mold is a health hazard.
Wiki User
∙ 7y ago
Wiki User
∙ 12y agoMold can damage your home and your health. The following advice tells you how to clean mold from the walls of your house and keep it off.
Size up the moldy areaFirst, you need to decide if you have a large or small area of mold. A small area is less than 10 square feet. If your area is larger than that you should consider professional mold removal. Seal the area from the rest of the house. Remember to always use protection. You need to wear gloves, goggles and breathing protection around mold. Make sure you cover all heat registers and ventilation ducts and remove all furnishings from the room. Open a window before you start to clean.
Never just paint over mold. Mold continues to grow even under paint. CleaningBag any moldy items and take them outside right away. Place them in a garbage container. Mold is removable from hard surfaces only. If your wall is glass, plastic or metal, you can scrub it with a non-ammonia soap or detergent. If your wall is made of a porous material, such as sheetrock, you must remove the affected wall area. If mold is on the wall stud, you need to scrub it. If scrubbing does not remove the mold from the wall stud, then sanding is your next step. Disinfect the area after the mold is removed. Bleach and water is a good choice for disinfection. A solution of 1/4 cup to 1/2 cup of bleach to one gallon of water should do the trick. The surface needs to remain wet for 15 minutes to insure it is properly disinfected. Then rinse the area and dry with fans.
Once you have removed your mold, remember that moisture prevention is the only way to keep the area free from mold in the future. Fix any leaks, and make sure you have adequate ventilation.
Add your answer:
Earn +20 pts
How do you remove mold from your walls and or ceiling?
If your mold problem is an area of less than 10 foot square you can easly remove your self if more than this you should consult a mold remediation service. A website with more info is Floodx.com goto there knowledge section and link to EPA step by step removal guide.
can you please tell me if you can wipe mold off the walls and the walls then look clean?
Well you can wipe the mold off but it will still have a dirty look to it. Also the mold is inside the wall too and it will just regrow over the wall again.
How do you clean mold off walls?
Bleach and water. Be sure sure to wear gloves. Make sure if you're renting you're taking pictures.
What is the difference between air duct cleaning and mold removal?
Air duct cleaning generally refers to the cleaning of cooling and heating system components, including the air ducts themselves, as well as heating and cooling coils, drain pans, fans and more. Mold may or may not be present in any of these components. Mold needs moisture to grow. If moisture is present, like if your air conditioning unit is leaking, microbiological growth may occur and mold spores from such growth may be released into your home. Often, air duct service providers will attempt to correct this situation by applying chemical biocides to kill microbial growth (e.g. mold). However, it is important to note that most air duct service providers are not certified in removing mold; rather, they will remove visible dust and debris in cooling and heating systems. Mold removal, on the other hand, involves the actual inspection, removal and remediation of a mold infested area. It is recommended to contact a mold remediation specialist who is certified with the Institute of Inspection, Cleaning and Restoration. These specialists are trained to completely remove, remediate and restore your property. In addition, more and more remediation companies like www.drymeout.com are using natural mold disinfectants rather than chemicals. In general, it is important to note that if there is mold growth, whether in your ducts or anywhere on your property, the condition that is causing mold growth must be corrected or mold growth will reoccur. In sum, if you suspect mold growth in your air ducts, it would be wise to contact a certified mold remediation specialist who can completely remove the mold in your home and remediate it.
What is a good title for your science fair project concerning mold?
their isn't one
How do you remove mold on limestone basement walls?
You can remove mold on limestone basement walls by using mold remover. Bathroom cleaners and bleach also work well for this use.
how do i remove mold from vinyl?
how do i remove mold from vinyl
How do you remove mold from your walls and or ceiling?
If your mold problem is an area of less than 10 foot square you can easly remove your self if more than this you should consult a mold remediation service. A website with more info is Floodx.com goto there knowledge section and link to EPA step by step removal guide.
What chemcals I can use to Kill potential mold behid the damp walls?
What chemcals I can use to Kill potential mold behid the damp walls?”
How do you remove black mold from old windows?
Sugar soap. I discovered this completely by fluke whilst cleaning the walls in my new flat. It works beautifully.
How do you remove mold from bathroom walls?
Go to your local hardware store and ask them for chemicals for this purpose. You can try bleach or a solution water with Oxi clean
How do you remove mold or mildew on leather furniture?
How to remove mold from black couches
Does anyone know what black marks mean on my walls - look like would be from radiators but no heat vents in location.nail heads are black and can be seen through drywall?
This sounds a lot like mold. It can be dangerous to your health. You can call a mold removal expert to see what it will take to remove the mold.
Can mold grow inside the walls of a bathtub enclosure?
If there is any kind of an opening or leak, then yes, mold could grow inside the walls of a bathtub enclosure. Moisture and darkness are the perfect environment for many kinds of mold to grow.
can you please tell me if you can wipe mold off the walls and the walls then look clean?
Well you can wipe the mold off but it will still have a dirty look to it. Also the mold is inside the wall too and it will just regrow over the wall again.
how to remove mold from non wood deck?
how to remove mold from non wood deck
Why does mold grow on walls?
Mold grows on walls because of moisture do to water damage in the home sometimes in in the basement. Moisture can get trapped inside the walls and can create mold growth. Mold can also cause problems with ones allergies and can also cause skin and eye irritation.
