answersLogoWhite

0


Best Answer

drain your radiator at least 1/2 way and catch the coolant. remove fan shrouding while radiator is draining. remove serpentine belt. remove hoses attached to water pump. unbolt water pump with fan attached and remove. be careful not to damage the back side of the radiator.

place pump/fan assembly on a bench. use a strap wrench on the pulley and a big wrench on the fan nut. remove fan from pump--it is left hand threaded and isn't on there very tight.

(correction: although some literature may indicate that the fan is left handed thread, it is in fact a right handed thread)

(also note that an alternate method of removing the fan using a trap wrench is to remove it while on the vehicle and with the belt still in place. Use a 12-16" adjustable end wrench "aka Cresent" and tap the wrench lightly with a hammer)

you will have to transfer the thermostat and its housing to the new water pump. use a scraper and/or scouring pad to clean the pump mating surface on the block. reinstall fan onto new pump--you don't have to tighten it that much. reinstall water pump--again be mindful of the backside of the radiator. torque to spec. reattach hoses.

refill radiator and start motor. check for leaks while you make sure that there is no air trapped in the cooling system. once you are sure there are no leaks reinstall fan shrouding.

as a side note: while you are at it you may as well flush your entire cooling system. i suggest doing that before you actually change the water pump as you will be flushing and draining the system anyway. once its cleaned out (using the old water pump) you can put the new one in and install new coolant.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to replace water pump for a 2003 Chevy silverado?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace water pump on 2003 5.3L Chevy Silverado Z71?

look in the manual


Removal of blower motor resistor on 2003 Chevy silverado?

Replace shoes brake 2003 Chevy


How do you change the return filter on a 2003 Chevy Silverado?

To change the return filter on a 2003 Chevy Silverado is easy. Simply open the hood of your car and gently remove the filter and replace with new filter. that it!


Where is the fuse for heated seats on a 2003 Chevy Silverado?

where is the fuse for heated driver seat on 2003 Chevy Silverado>


What is the type of brake light bulb for 2003 Chevy Silverado?

a 2003 Chevy silverado taillight bulb uses a 3157


How do you change the knock sensor in a 2003 Chevy Silverado 5.3?

how do you change the knock sensor in a 2003 Chevy silverado 5.3


Radio unlock code for 2003 Chevy Silverado 2500 hd?

How do you un lock a raido on a 2003 chevy silverado


Will a 2006 Chevy silverado hood fit on a 2003 silverado?

YES


Does the 2003 Chevy Silverado stock stereo fit in a 2000 Chevy Silverado?

No, Chevy changed the wiring harness in 2003. and the way it is mounted, it can be made to work though.


Are you able to install a 2005 Bose 6 CD changer radio into a 2003 Chevy silverado?

Yes you can install this CD changer into a 2003 Silverado. It shouldn't be too hard to remove the standard radio and replace it with this.


Will a 2005 Chevy Silverado bumper fit a 2003 Chevy Silverado?

Will a 2000 chevy 2500 bumper fit a 2005 chevy 2500


How do you change the dashboard light behind the speedometer on a 2003 Chevy Silverado?

You can't you have to replace the whole dashboard instrument cluster assy.