how do you set timing on 88 s10 2.5? ?
The timing on a 2.8 V6 Chevy S10 needs to be set any time the valves, heads, or crankshaft are worked on. The gears of the timing chain and timing sprocket need to be aligned to set initial timing.
There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.
how do you set the timing for a 1997 Chevy 350 5.7 engine
Chevrolet s10 v6 2.8 liter pickup timing degree, how to set the degree
On the Vortec the computer does it all.
Chevy S10 in 2001 didn't have a 2.0L engine. They had a 2.2L engine and it has a (DIS) distributorless ignition system. There is no timing to set.
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
you cant set "timing" you have to have a scanner to set cam sensor to 0 +or-2
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
How do you set the timing on a 2000 Chevy blazer (V6)
You don't. It's done electronically with information from various sensors sent to the engine control module.
Answer timing 95 4.3 vortec Chevy blazerTiming is non adjustable, period. The high voltage switch ( or known as the distributor) is pinned into lower intake and cannot be moved. The timing is controled by the computer.
The timing should be set at 10:4.
Set timing on a 2.8 liter v6
Ignition timing is electronically controlled.
on the harmonic balancer there are two marks, one set at 12o'clock and set at 3o'clock, standing in front of the engine, where do both marks need to be set?
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
how do you set the timing belt on a 1997 ford contour 2.0 4cy
how do i set the timing for a chevy 350 small block?
You don't, it is done electronically.
You need a timing light to set the correct timing. Once the truck has been set at base timing at 0-2 degrees by disconnecting the timing wire and setting the dist., the computer adjusts the timing by itself to the proper setting.. There is not an adjustment for the the idle speed on this truck.
There is a big difference in how timing is set. We need to know what year.
That requires an engine scanner to set the timing.
how i can set 1997 Mitsubishi diamante timing beltAnswerhow i can set 1997 Mitsubishi diamante timing belt