The pulley allows the re-direction of force by 180 degrees. A ramp cannot do that. Say you need to lift an engine out of a car's engine bay. You would use a pulley because as you pull straight down the engine goes straight up. That presumes that you weigh more than the engine.
I don't know........ Google it, it's better than Answers.com
A tyre has more friction than a pulley.
That is not always true. Sometimes a fixed pulley is more useful.
1. The fixedpulley - requires more effort than the load. 2. The movable pulley - moves with the load which allows for less effort than load. 3. The combined pulley - effort is less than half the weight of the load
If you are talking about a simple pulley with the pulley attached and load rope attached to the object then you will need a little more than 75N of force. Lifting an object (at a constant velocity) requires a force equal but opposite the weight of the object. With any simple machine you will need to do more work to overcome friction. If you were to use a single pulley with the pulley attached to the object then you will need a little more than 37.5 N. If you were to use a multiple pulley system then you would need to know the mechanical advantage of the pulley system.
yes
The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.
No, your better off starting on a 4 foot mini ramp. Perfect any moves before taking on a halfpipe.
Lubricate the slope with grease (except where you would be walking, of course!), or put the weight on a wheeled trolley. You could also use a pulley system, but that would mean pulling the weight up, rather than pushing.
Fixed if it weighed as less than you, but a movable pulley wouldn't be helpful here. You'd be best with a pulley with multiple supporting ropes.
I don't know........ Google it, it's better than Answers.com
Drive Pulley = pulley on motor Driven Pulley = pulley on blower First determine your Ratio - divide large pulley size by small pulley size this will give you gear ratio, Example 2" drive pulley and a 4" Driven Pulley = 2:1 gear ratio If you know your motor shaft RPM divide that number by the ratio to get the RPM of the driven pulley, if your shaft rpm is 1800 rpm you would divide 1800 by 2 which would = 900 rpm on your driven pulley if your drive pulley is larger than than your driven pulley you multiply the rpm by the ratio example 1800 rpm x 2 = 3600 rpm
Yes.
Concrete has a lot of creases and bumps and the wooden ramp is smooth
It depends on the ramp surfaces because some ramp surfaces have less friction than others and some have more friction than others.
I'm sure there are different kinds of wax that will work better than skate wax, but any wax is going to work better than none. So I say Yes, do it!
A tyre has more friction than a pulley.