The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
The most common type of connector used on an RG6 cable is an F-type connector. If you unplug your cable TV this is the type of connection you are most likely to find on the end.
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
It depends on what kind of hub you mean. Some useful cables could be power cables, CAT 5e cables, fiber optic cables, etc.
The connector used to terminate Ethernet cables is called an RJ-45 connector. They are the clear plastic connectors you see at either end of an Ethernet cable.
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
No there is not. But the cable used to connect to internet access devices would be ethernet cables or phone cables for dial up connections
The 3 COMPONENT cables are to be used if you don't have the HDMI connector.
The connector you need is called a "F" connector. It can be done with hand tools but Radio Shack makes a CRIMPER and a STRIPPER for just this work.
Crimping tools are designed to connect a connector to a cable. It is used on phone cables as well as network cables. All you do is place the connector with wires into the tool and squeeze the handle.
RJ45 Telecommunications - a connector standard for telephone cables, RJ45 cables are also used as a connector for a computer network by way of connecting to the internet.
The DB25 connector on the rear of a PC is used (if it has pins) to connect a printer or (if it has sockets) to connect a modem.
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
VGA cables are cables which are used with computer electronics. The cables are primarily used to connect the monitor to the computer. Some of these cables are made for specific monitors or devices.
20- pin connector
A "Type A" connector.
It depends on what kind of hub you mean. Some useful cables could be power cables, CAT 5e cables, fiber optic cables, etc.