The "scale" of a map is a proportionality constant between distances on the map and corresponding distances on the area the map represents. Call the unknown number of inches n. Then 1/2 = n/12, or n = 6.
Assuming you mean "two and a half inches" the correct answer would be 1000 miles.
It would represent 6 inches!
Umm...6.
6
If 1 inch = 4 mm. Then 52 inches will be 208 mm.
Sure. That would be OK.16 inches on the map would represent (16 x 1500) = 24,000 miles, roughly the earth's circumference.16 inches or a little bit bigger to represent the whole surface of the earth, cut up and flattened out ...that's reasonable.
There are 1760 yards in one mile. There are 3 feet in one yard. There are 12 inches in one foot. There are 16 sixteenths of an inch in one inch. Therefore, there are 1760 x 3 x 12 x 16 = 1013760 sixteenths of an inch in one mile.
1 foot = 12 inches. Therefore 1 inch=1/12 of a foot. Half an inch=1/24 of a foot
If you want to convert 4.3 cm to inches, then divide 4.3 by 2.54.
It would represent 6 inches!
the scale
On the scale 1 inch:2 miles. 12 miles would be 6 inches
On that scale... 6 inches !
60
An inch and a half.
Two inches is 1,000 miles and 34 inches is 17,000 miles.
The scale is simply how many miles there are to an inch or how many miles are represented by an inch etc etc. To do this you divide the amount of miles or the larger amount by the inches the smaller amount. 400/2.5 = 160 . The scale is 160 miles per inch. Proof - 160 + 160 + 80 = 400 miles ---->>>> 1 + 1 + .5 = 2.5 inches
Basic math - If one inch= 400 miles; 2 inches = 800 miles + 1/2 inch=200 miles
That depends on the scale. If an inch equals 100 miles, they will be 3.22 inches apart. If an inch equals 50 miles, they will be 6.44 inches apart.
One.
100 miles