the real answer is NOTHING,,, i know u
probably dont believe me but if u try to put that answer and its right
u owe me money=]
The pressure measured in a closed two-liter container would depend on factors such as the temperature and the amount of gas or liquid inside the container. If the container is sealed and there is no chemical reaction occurring inside, the pressure would remain constant at the equilibrium pressure of the system.
Anemometer is an instrument to measure the wind speed.
we want attach stainless steel plate bottom of pressure cooker
It's fairly simple. Build an air-tight container, and attach a vacuum pump to suck the air out. It's a fairly common thing to do, actually. For a more elaborate vacuum chamber, build a second fairly large airtight container and connect the two together with a valve between them. Attach a vacuum pump (or several of them) and "evacuate" the air from the large chamber. Then, when you open the valve between them, the air in the smaller chamber will immediately be sucked out and into the larger chamber, creating an "instant" vacuum.
No, they attach to the outside of the hair follicle.
To determine the volume of a solid that floats on water, you can use the principle of displacement. Submerge the solid in a container of water and measure the volume of water displaced. This volume is equal to the volume of the solid.
Why would it be necessary to attach a manometer to the hypsometer
A YouTube manometer typically consists of a U-shaped tube filled with a liquid (e.g., water). One end of the tube is connected to the gas source, and the other end is open to the atmosphere. The difference in liquid levels between the two sides of the U-tube indicates the pressure difference between the gas and atmospheric pressure. By measuring this height difference, one can calculate the gas pressure using the equation P = ρgh, where P is the pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height difference.
You need to attach a fuel pressure gauge to the port on the fuel rail to measure the pressure.
Anemometer is an instrument to measure the wind speed.
You could use a ruler to measure its size, or a thermometer to measure its temperature.
You attach a pressure test kit to where the radiator cap goes, and pressurize the system. If it holds pressure, it's good.
The Erlenmeyer flask was named after its creator Emil Erlenmeyer, who was a German chemist. It is a flat bottomed cone-shaped container that has a tapered neck so that a person can hold it, put a stopper on it or attach a clamp with it. This flask is used to measure, mix, and store liquid.
The Home Depot maintains a website dedicated to these pressure washers. I will attach the link below.
the basic plans are simply to attach a 12 gram charger to a pvc pressure holding device, then attach that to a valve, and then a barrel.
allows you to attach a fuel pressure gauge to check fuel pressure, you can also use it to relieve the fuel pressure during maintenance
we want attach stainless steel plate bottom of pressure cooker
Air Probe.