answersLogoWhite

0

140 ml of glyphosphate will give you a 2% solution which should be enough. spray the knotweed and wait 10-14 days, then spray again to make sure. good luck

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How much glyfos weedkiller to a 16 liter sprayer?

The amount of glyphosate weedkiller to use in a 16-liter sprayer depends on the specific formulation and concentration of the product, as well as the target weeds. Generally, a common application rate ranges from 1 to 5 liters of glyphosate concentrate per hectare. For a 16-liter sprayer, you might typically mix around 100 to 200 milliliters of glyphosate concentrate, diluted with water to the total volume of 16 liters, but always consult the product label for the exact dosage and mixing instructions.


When using sprayer how much do you cut in?

When using a sprayer, the amount of product you cut in depends on the specific formulation and the area you intend to cover. Generally, it's recommended to follow the manufacturer's guidelines for dilution rates, which are usually expressed in ounces or milliliters per gallon of water. For optimal results, ensure even coverage by adjusting your sprayer settings according to the type of material and the sprayer's specifications. Always test a small area first to gauge effectiveness and prevent over-application.


How much to dilute paint for Wagner sprayer?

To dilute paint for a Wagner sprayer, you typically want to aim for a viscosity of around 20-30 seconds when using a viscosity cup. This usually means adding about 10-20% water or a compatible thinner to your paint, but the exact amount can vary based on the type of paint and sprayer model. Always refer to the manufacturer's guidelines for specific recommendations on dilution ratios for optimal performance.


How much ferti-lome systemic fungicide do you put in a hose end sprayer?

When using ferti-lome systemic fungicide in a hose-end sprayer, typically you should mix 2 to 4 ounces of the fungicide per gallon of water, depending on the severity of the disease and the specific instructions on the product label. Make sure to thoroughly read the label for the recommended dilution rates and application guidelines. Adjust the amount based on the size of your sprayer and the area to be treated. Always follow safety precautions and guidelines for effective and safe application.


How do you turn the sprayer on a Lesco sprayer?

i have a lesco fertalizer sprayer i don't know how to make it spray from the tank to the lawn?


What are the steps to take when performing a kitchen sprayer replacement?

To perform a kitchen sprayer replacement, follow these steps: Turn off the water supply to the sink. Disconnect the old sprayer from the hose. Remove the old sprayer from the sink. Install the new sprayer in the sink. Connect the new sprayer to the hose. Turn on the water supply and test the new sprayer for leaks.


Paint Sprayer Reviews?

form_title= Paint Sprayer Reviews form_header= Find the best paint sprayer for your needs. What will you be painting?*= _ [50] What is your budget for a paint sprayer?*= _ [50] What brands are you interested in?*= _ [50]


When was the orchard sprayer invented?

The first orchard sprayer was used in 1909.


How do I go about replacing a sink sprayer?

To replace a sink sprayer, first turn off the water supply under the sink. Unscrew the old sprayer from the hose and remove it. Attach the new sprayer to the hose and tighten it. Turn the water supply back on and test the new sprayer.


How much is a cheese sprayer paid?

A cheese sprayer makes about $77,80 a year


How can I replace a faucet sprayer in my kitchen sink?

To replace a faucet sprayer in your kitchen sink, first turn off the water supply under the sink. Next, unscrew the sprayer hose from the base of the faucet. Remove the old sprayer by twisting it counterclockwise. Install the new sprayer by twisting it clockwise into place. Finally, reattach the sprayer hose and turn the water supply back on.


What are mixing instructions for Malathion?

Malathion should be mixed following the instructions provided on the product label. Typically, it is mixed at a specific rate with water in a sprayer or mixing container. It is important to wear personal protective equipment and ensure thorough mixing to achieve proper dilution and effectiveness.