Yes. Open circuit.
A: It depends on the failure type a short will not necessarily make an open circuit but rather a non functional circuit.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
The whole circuit fails - because the action of the bulb blowing cuts the circuit.
They can be connected to either supply. A bulb in series that fails, will cause all the other bulbs to go out. A bulb in parallel that fails, will have no adverse effect on the other bulbs in that circuit
First, you will need very high voltage to run them altogether. Second, short circuit will be extremely hazardous in your house due to high voltage. Thirdly, you can't switch off the light without off the heater or air conditioning.
In a series circuit each light completes its part of the circuit and connects to the next light. So, if one light fails, the circuit is broken and the flow of current to all lights must stop.
1) If any component fails, then the whole circuit fails. 2) Voltage across any component may be hard to control.
in a series circuit, if any one item is turned off or unplugged, the entire circuit fails.
No. Series circuit has 1 path to flow.
If a component of a parallel circuit fails, there are complete pathways for electricity to allow the remaining components to carry on functioning. ( For instance if the living room light bulb fails, the kitchen light can still work.) Also, if you link several bulbs in series, the current through them drops and they are dimmer than one on its own, but this doesn't happen with a parallel circuit.
A relay race would be an example of a series circuit. Since every runner relies on the runner before him/her to continue on, if one runner fails the rest of them fail. With a series circuit, if one part of the circuit fails, all of the parts before and after it fails. A parallel circuit does not completely fail if one or more of the parts fail.
Both are same. Only thing it depends upon the incoming voltage. In series ciruity if one bulb fails, the ciruit continuity breaks . In case of paraleel circuit even if one bulb fails the circuit continuity will not get affected
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
The whole circuit fails - because the action of the bulb blowing cuts the circuit.
if any item fails, they will all fail ...{not work}
It is a series circuit, where all the lamps (for instance) is on the same wire. If one lamp fails, the rest lamps will also go out.
A circuit of a series configuration.
A parellel circuit does not fail if one light dies. In a series circuit, it's broken if one light fails (like the old style Christmas lights). See link for example...