The lock went bad. Call a locksmith and get a replacement installed.
how to remove key stuck in ignition switch in Chevy colbalt
Probably a stuck solenoid.
I would highly recommend calling you dealership. :)
A starter will not disengage if the ignition switch is stuck or if the solenoid has jammed. This will cause the starter to constantly receive power.
stuck in your mind permanently
Well, it sounds like the chip that is in your key may have broke or got stuck on a part of the ignition. I had that problem. This happened not long after I had had to have the ignition replaced?!?
not unless you want it permanently stuck to your iron!
There should be a lock on the ignition a push button that you push and turn to remove the key
Turn the ignition off.
A guy has stuck his key in your ignition
There are several things that can cause a key to get stuck in the ignition. You can try turning the steering wheel a bit to the left or right to see if that allows it to release. Also, try pushing the key in a bit more and turn it to the lock position, then try pulling it out. Don't force the key or it could break off in the ignition.
Your ignition key may be too worn down, the car dealership can probably make you a new one. Another cause may be worn lock cylinder parts (springs, etc.) or there could be dirt/sand in the cylinder.