Want this question answered?
Be notified when an answer is posted
Instruction has three meanings: 1. An instruction is something that someone tells you to do. 2. If someone gives you instruction in a subject or skill, they teach it to you. 3. Instructions are clear and detailed information on how to do something.
Problem: What is a number between 1-7? Instructions: If your good at using a calculator, punch in "1 + 7 ÷ 2 = 4". There's your answer, not so hard wasn't it XD
They are known as the pastoral epistles - 1 and 2 Timothy and Titus - to give instructions concerning church order, doctrine, and discipline.
(3x3+1)2+1=7x2+1=15 and that is how you use parenthesis but, always do parenthesis before you do anything else......^_^
in money ($1 1/2)
least count of theodolite is 1 second
Process of Measuring Horizontal Angles Using a Theodolite 1. Setting up the Theodolite: This includes mounting the theodolite on a tripod and making sure it is comfortable for the user. 2. Unlock the upper horizontal clamp. 3. Rotate the theodolite until the arrow in the upper or lower rough sight points to the feature of interest and lock the clamp. 4. Look through the main eyepiece and use the upper horizontal adjuster to align the vertical lines on the feature of interest. 5. The reading is taken by looking through the small eyepiece. Using the minutes and seconds adjuster set the one of the degrees on the horizontal scale so the single vertical line on the bottom scale is between the double vertical lines under the selected degree. 6. The reading is the degree which has been aligned and the minutes and seconds read from the right hand scale and is the horizontal angle from the reference line. Process of Measuring Vertical Angles Using a Theodolite Process of Measuring Vertical Angles 1. Setting up the Theodolite: This includes mounting the theodolite on a tripod and making sure it is comfortable for the user. 2. Unlock the vertical clamp and tilt the eyepiece until the point of interest is aligned on the horizontal lines. Lock the clamp in place. 3. Looking through the small eyepiece, use the minutes and seconds adjuster to align one of the degrees on the vertical scale with the double lines just below it. 4. The reading is the degree that has been aligned and the minutes and seconds is read from the right hand scale. 5. To complete the reading, it may be necessary to measure the distance from the theodolite to the point of interest. The above is al true, but doesn't discuss the practical uses of a theodolite. For example, if you want to know the height of the top of the gable on a house, you could use a theodolite. First, set up the theodolite (btw, I made one with a piece of copper tube, a protractor and a cheap wooden tripod) as noted above, make sure the ground is pretty level between the house and the theodolite, and then measure the distance from the vertical side of the house to the theodolite. (You may choose to move the theodolite so that the distance is the square of a whole number.) Then aim the scope (tube) at the upper-most point of the gable and note the degree of angle on the protractor. If you have pretty level ground between the theodolite and the house, the angle at the intersection of the side of the house and the ground should be 90 degrees. So, now we have two angles (the 90 degrees at the intersection of the side of the house and the ground, and whatever angle you recorded at the theodolite) and a side (the distance from the house to the theodolite). With this information, you can calculate the third angle and the other two sides, one of which will be the hypotenuse and the other will be -- tada! -- the final leg, which will tell you the height of the point you picked out at the top of the gable.
1. Make an Xtranormal account. 2. It should show you the instructions on how to make a movie
A theodolite is a Surveyor's measuring instrument that began to take its present form in the 17th century. In the work, 'The Surveyor in Foure Books' by Aaron Rathborne (London, 1616) an elaborate drawing of a theodolite can be seen on the front piece. These were used as early surveying tools, and were extremely acurate. Thomas Jefferson used such an instrument during his time as a surveyor. Later versions are also known as "Dumpy Theodolite", while 20th century versions use extremely fine optics, or lasers. The tool in it's present,modern versions is indespensible as a surveying/mapping tool. Wala lang...Kervin to of BSCE 3-1 PUPSMBTheodolites- pronounced as it is spelled, are surveying instruments of high precision and accuracy. They are a more sophisticated form of what is usually called a transit. The Theodolite is always operated from a tripod and has Base (circular) and Cylindrical levels on the instrument to keep it level. The name is thought to derive from the Greek- approximately ( The Eye of God). Modern engineering, building and bridge construction, etc, even mining, could not function without the theodolite and the more modern derivatives using electronic devices and GPS. ( progress in full swing, as with Cameras and electronic measurement of parameters, as with modern non-digital Nikons.) By the way Nikon makes theodolites. One of the best historically and by no means an obsolete instrument was/is the Wilde-Zeiss theodolite which reached its present form around l938. a common sight on Gotham building sites. Their uses are many!
writing what your giving them instructions to do.
Use a site called Peeron. A link to the instructions can be found below (copy+paste into the address bar of your browser) http://peeron.com/cgi-bin/invcgis/scans/8621-1?ct=1.
Working It Out - 1990 Instructions 1-9 was released on: USA: 10 November 1990
Undercovers - 2010 Instructions 1-2 is rated/received certificates of: Netherlands:12
For a 1 pint 8 oz container, you would be mixing 24 oz of solvent. Since the instructions call for 2 tablespoons per gallon, you would need to use 1.5 tablespoons in this 24 oz container.
uh,,, a script?
instructions means more than 1 instruction (ex.go home and do your homework) but instruction means 1 instruction (ex.do your homework)
For medication ingestion you can induce vomiting. WARNING!!! Do NOT use ipecac syrup. It is toxic to dogs Use regular Hydrogen peroxide at 1 teaspoon per 10lbs body weight. Check vomitus for remainder of pills and repeat after 10 minutes. Call your Vet for further instructions with name of medication taken and quantity. In the U.S.A. call National Animal Poison Control for instructions 1-800-548-2423 or 1-900-680-0000