Because 1 kiloohm is 1000 ohms. 1000 ohms is a higher resistance value than 10 ohms.

It is a stronger isolator, meaning that it leaves less current through.

10 ohms has more resistance than 5 ohms.

847

Really it is 10 ohms.

10 ohms or less is considered a good earth ground reference. The lower, the better.

35 ohms if they are in series as R(total) = R1+R2+R3If they are in parallel then the formula is 1/R = 1/R1 + 1/R2 + 1/R3Which in this case gives 2.86 ohms.The total resistance when resistors are in parallel is ALWAYS LESS than the lowest individual value.

30 ohms

In series it's 30 ohms. Parallel it's 6.67 ohms.

change in to ohm(multiply by 10^-6) AND than convert kilo ohms (mul. 10^-3) that means total mult. factor is 10^-9

9 is less than 10.

18

10 less than 449 is 439

10 less than 5

4 less than 10 is 6

Ryan's Hope - 1975 1-847 was released on: USA: 10 October 1978

No, it is less than 10 and 100.

It is one less than 10 lakh 99/10

30% less than 10 = 70% of 10 = 7

-- If the 20 ohms and the nother 10 ohms are configured in series, then the totalnet effective resistance is 30 ohms.-- If they are configured in parallel, then the total effective resistance is 62/3 ohms.

The number that 30 is ten less than is 40. Half that is 20. So the question becomes "what number is as much more than 10 is less than 20". This is gobbledygook, but if I rephrase to say "what number is as much more than 10 than 10 is less than 20", then since10 is less than 20 by 10, I guess 20.

9 is one less than 10.

472 is 10 less than 482.

10 less than 4 = -6

one tenth less than 10 is 9 9/10