yes
Any good lawn mower repair shop should be able to order just about any brand of mower part for you. Good luck.
Ranch King is merely a brand name...the maker....MTD Products, Cleveland, Ohio.
MTD
Need owners manual for ranch king pro riding lawn mower!
You can change the drive belt, on your lawnmower, by loosening the tensioner pulley. With the tensioner pulley, loosen the drive belt will come off and can be replaced.
5L74 gates
An MTD brand made for 20+ years. What is the actual question?
under a plastic cover, next to the carb,
A diagram can be found in related links.
Well then, yes, you might be a redneck...
On a Ranch King lawn mower, the spring for the tension pulley typically attaches to a fixed point on the mower frame or deck and connects to the tension pulley itself. This setup allows the spring to provide the necessary tension to ensure proper operation of the mower's drive belt. Always refer to the owner's manual for specific diagrams and attachment points for your particular model.
To adjust the hydrostatic linkage on a Ranch King Pro mower, first, ensure the mower is turned off and on a flat surface. Locate the adjustment linkage under the mower, typically near the hydrostatic transmission. Loosen the adjustment nut and make small adjustments to the linkage length as needed, then retighten the nut to secure the setting. Finally, test the mower's movement to ensure it operates smoothly and make further adjustments if necessary.