DOT 3 and DOT 4 brake fluids are not compatible with one another. You should only use the fluid that your car manufacturer suggests.
DOT 3 Brake fluid is recommended. DOT 4 will also work, so will DOT 5.1, DOT 5 is not compatible though.
A 2000 Jeep Wrangler would use Dot 3 brake fluid. Dot 4 is also acceptable. Just do not use Dot 5, it is not compatible.
dot 3
It is a castor oil based brake fluid. Do not mix with systems requiring Dot 3 or Dot 4 which are glycol based.
Yes. DOT 4 has a higher boiling point than DOT 3, and it is less hygroscopic (less affinity for moisture). Beware of DOT 5, however, because it is not compatible with other brake fluids.
DOT 3 is a type of brake fluid
DOT 3 or DOT 4, you can use either, or both, they are fully compatible. However DO NOT mix DOT3/4 with DOT 5, they ARE NOT compatible. If mixed it will form a gel/slime type mixture and completely foul your system. Hope this helps!
DOT 3 DOT 3 DOT 3 DOT 3 DOT 3 DOT 3 DOT 3 DOT 3 DOT 3 DOT 3
Dot 3 or Dot 4Dot 3 or Dot 4
GM Delco Supreme II brake fluid is recommended for all vehicles that require DOT 3 brake fluid. It contains enhanced corrosion inhibitors to prevent premature wear, and retains its boiling point properties longer than conventional DOT 3 brake fluids. It is also compatible with disc and drum brake systems.
DOT 3 brake fluid