0
What else can I help you with?
How can I fix Sputtering at low rpms and when engine is warm in a 1998 Honda civic lx?
change the spark plugs
Do you remove 2000 dodge Dakota spark plugs when the engine is hot warm or cold?
Spark Plug RemovalAs far as the plugs are concerned, it doesn't matterwhether the engine is hot, warm, or cold.However, from the standpoint of safety and comfort of the person removing and replacing the plugs, it is best to do when the engine is cold.Working on a hot engine can result is some nasty thermal burns to your fingers, hands, and forearms!!!!!
How do you fix a hesitating Toyota Corolla engine which occurs when the engine is warm and after stopping for a short time.when driving again engine hesitates.?
Try changing your spark plugs, and your spark plug wires.
Can you change spark plugs on a diesel?
It depends on what car or engine you have to decide how many. No diesels don't have spark plugs. Some have glow plugs. Not the same thing. Glow plugs are used to heat the cylinders. For quicker starting. On certain old diesels, yes. For example the IH farm tractor model M diesel made in the 1940's started on gasoline (with spark plugs) and switched over to diesel when the engine was warm (spark plugs not used at this point). That is true. But I didn't think about them. Most people today have never heard of a system like that. There was also engines with pony motors used to start the main engine. I learned the hard way. Not to stand in front of the arm. When you start the main. They can kick you.
Why its startup fine then when the engine is warm starts the miss on 4?
Warm the engine up and then perform a compression test on each cylinder 1 at a time. Check for similar compression. Check condition of spark plugs, looking for oil deposits etc... swap plugs to different cylinders.
Have a idle problem with a 98 windstar 3.8idles good when cold idles rough and stalls when warm works fine when driving?
The most common reason for a vehicle to run rough when it is cold is bad spark plugs or bad spark plug wires. Change the spark plugs and spark plug wires.
What is the difference between spark plugs and glow plugs?
A spark plug actually sparks, and is generally only used in a gasoline engine. A glow plug just gets warm (glows), and is used in some diesel engines.The difference between spark plugs and glow plugs is that a spark plug delivers current from an ignition system to the combustion chamber while a glow plug is a heating device that aids starting diesel engines.A spark plug actually sparks, and is generally only used in a gasoline engine. A glow plug just gets warm (glows), and is used in some diesel engines.The difference between spark plugs and glow plugs is that a spark plug delivers current from an ignition system to the combustion chamber while a glow plug is a heating device that aids starting diesel engines.
What could cause a car to shake and shut off when stepping on the gas?
I'm not in expert, but it could be ( in winter time) that the car engine is still cold. But if its warm temperature outside, it could have something to do with the gas filter. Its probably blocking from the gas to get to where its supposed to go. It also could be your spark plugs, or wires from the spark plugs. You could check the spark plugs yourself. If the end of the spark plug is dark, like almost black, you need new spark plugs. If you look at the wire from the spark and its worn out, then replace them.
Why will my 1990 Chevy tbi start when warm but not when cold?
check/replace spark plugs
Can the throttle body on a 1987 Chevy Celebrity cause miss fires when engine is warm?
Misfire is usually caused by faulty spark plug wires or spark plugs or both. I don't see the throttle body causing misfire.
Where are the spark plugs on a Mitsubishi Endeavor?
The plugs i believe are near the exhaust manifold.... If you are unfamilliar with changing plugs you should not do it yourself Because the plugs are near such high heat they are prone to fouling Try to use NGK plugs and spring for the irridium As you may already know never change plugs on a engine that is warm or hot. First thing in the morning stone cold is the best time to do it. You can google ask a Mitsubishi Tech on the web for further assistance
How do you read a compression gauge?
To read a compression gauge, first ensure engine is warm and spark plugs are removed. Connect the gauge to a spark plug hole, then crank the engine a few times and note the reading on the gauge. Compare the reading to the manufacturer's specifications for your engine to determine if the compression is within a healthy range.
