0
no they should be made out of uranium.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How to make Elastic Band Powered Car?
You build a basic car, with a body and a way to support the front wheels and the back wheels. Each set of wheels should be firmly attached to an axle, maybe a piece of dowel, so that when the axle turns, so do the wheels. Then you need some way to attach the end of a strong rubber band to the middle of each axle so that when you rotate the wheels, the rubber band winds around the axle and stretches tight. You can do this with a small nail or screw put carefully through the dowel. The best way to wind the wheels is probably to push down on the car while you push the car along a surface, like carpet. once the rubber band is really tight, you let the car go, and the stored energy in the rubber band unwinds the axle, and off goes the car You don't have to have the band wind around both axles ... you could make it either just frontal drive or rear-wheel drive, but it probably goes better if you use both axles. You could also use two rubber bands, one for the front wheels and one for the back wheels, with the ends of each rubber band fixed to the middle of the car. Remember, the car will go fastest and the most distance if you use a really BIG strong rubber band, and can wind it up around the axles really really tight. But if you make it TOO tight or too strong, the car or the axles might break when you wind it up, which is not good and really annoying. Another way of making a car like this is to make it like the rubber-band powered toy airplanes. Make a light frame with 4 wheels, and buy a little toy propeller or take it off a toy airplane, then wind up the rubber band by winding the propeller. Then when you let go the propeller, it will drive the car along.
Why rubber is used to make car tires?
Rubber is used to make the tyers of car because rubber provides more grip or we can get more and more grip using rubber and wile diving car we nedd very good grip.
Does rubber come from rubber trees?
Yes yes it does cause you use that rubber to make tires for your car
4w on a c?
4 wheels of a car
Is it burned rubber or burnt rubber?
You can use either term. 'Burned' and 'burnt' are variations on the same word, just like 'learned' and 'learnt'.So you could say, 'The car smelled of burned rubber', or 'The car smelled of burnt rubber'.
What car wheels is made out of?
rubber
What are co2 car wheels made of?
Carbon...
How do you put wheels on a CO2 car?
Figure it out !!
What factors will affect the performance of a CO2 car?
Aerodynamics of the car, the size of the wheels, the weight of the car, and the size of the CO2 cartridge.
What 4 rubber things does your car drive on?
Wheels.
What is a car's wheels made of?
the wheel is made of rubber
Are car wheels made of rubber?
The wheel is actually three parts. It is the metal rim, the rubber tire and the hub cap.
What materials have car wheels been made out of?
In order:Wood with metal tireWood with rubber tireSteel with rubber tireAluminum with rubber tireMagnesium with rubber tireLucite (Clear High Strength Plastic) with rubber tire
What care you do to prevent yourself from being struck by lightning?
rubber, the safest place to be in a thunder and lightning is in a car because of the rubber wheels.
How do you make a mousetrap car also using CO2?
first you buy a mouse trap, then you find old toy car wheels. next you fashon the wheels so they spin, then you take off the metal ontop of the trap, and place there a co2 can. then you tape it down and slightly open the cap. LET IT GO My brother just made a CO2 car in his woodshop class, then he just attached it to his car, and he got alot of distance.
What is another name for wheels on a car?
feets, shoes, thangs, soles, rubber, roots, chrome, etc...
How to make Elastic Band Powered Car?
You build a basic car, with a body and a way to support the front wheels and the back wheels. Each set of wheels should be firmly attached to an axle, maybe a piece of dowel, so that when the axle turns, so do the wheels. Then you need some way to attach the end of a strong rubber band to the middle of each axle so that when you rotate the wheels, the rubber band winds around the axle and stretches tight. You can do this with a small nail or screw put carefully through the dowel. The best way to wind the wheels is probably to push down on the car while you push the car along a surface, like carpet. once the rubber band is really tight, you let the car go, and the stored energy in the rubber band unwinds the axle, and off goes the car You don't have to have the band wind around both axles ... you could make it either just frontal drive or rear-wheel drive, but it probably goes better if you use both axles. You could also use two rubber bands, one for the front wheels and one for the back wheels, with the ends of each rubber band fixed to the middle of the car. Remember, the car will go fastest and the most distance if you use a really BIG strong rubber band, and can wind it up around the axles really really tight. But if you make it TOO tight or too strong, the car or the axles might break when you wind it up, which is not good and really annoying. Another way of making a car like this is to make it like the rubber-band powered toy airplanes. Make a light frame with 4 wheels, and buy a little toy propeller or take it off a toy airplane, then wind up the rubber band by winding the propeller. Then when you let go the propeller, it will drive the car along.
