If stored in an appropriate container and handled correctly, yes, sodium azide is safe to handle alone.
With that in mind, if not handled correctly, sodium azide can be lethal. It has an LD50 of 27ppm. NaN3 reacts violently with acids, carbon disulfide, dimethylsulfate, and metals (thus, do NOT store NaN3 on metal shevling or use metal spatulas during prep). It will also react with metal pipes, so do NOT dump down the drain.
Make sure you are wearing PPE, such as gloves, coat, goggles (not the worthless safety glasses), close-toed shoes.
Flask is something that holds the sweeet nectar of alcohol
to decrese ph
to acidify the solution
when the solution turns blue you add the sodium hydroxide (also if it is not blue you have gone wrong stupid)
The dissolution of sodium hydroxide in water is very exothermic. One might worry the solution may boil out of the volumetric flask and cause a hazardous situation. Volumetric flasks are also fairly thin compared to a beaker and aren't designed to take much heat, if any
5.0 grams.
Flask is something that holds the sweeet nectar of alcohol
to decrease ph
to decrese ph
to acidify the solution
23 grams of Na is close enough to 1 mole not to matter, so add 35.45 grams of Chloride ion to the flask.
when the solution turns blue you add the sodium hydroxide (also if it is not blue you have gone wrong stupid)
If you combine pure sodium with chlorine gas, you get a violent thermogenic chemical reaction that results in NaCl (Sodium Chloride; common table salt) and considerable energy release.
Dissolve 1,42 g of anhydrous, for analysis sodium sulfate in 1 L demineralized water at 20 oC, in a volumetric flask.
250 g sodium chloride contain 99,16 g sodium.
It depends on the nature of the chemical going into the conical flask. If you are titrating for carbonate or sodium ions there could be an error. Whatever, the product going into the flask, first flush it with a little of that product. Throw it away and then titrate. However, it they have been cleaned in a lab washing machine,, by a lab. technician, then the conical flask should be 'whistle' clean. L:ab. technicians use a special water soluble of pH 7 cleaner.