0
Both
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the pp-gf30 in your ford?
Electronic Vacuum Regulator which is part of the EGR emissions control system.
What is the 1994 gmc safari code 32?
the code # 32 is telling you that it`s a exhaust gas recirculation error. your electronic vacuum regulator valve controls EGR vacuum. what needed to be done is replace your EGR valve . the cost to replace this part is based on what type your vehicle needs . choices are electronic EGR valve at about $120.00 dollars if your vehicle has fuel injection. or $70.00 dollars if your vehicle has a carburator.
Where is the egr vacuum solenoid located in a chrysler 300 07?
The EGR on a 2007 is not vacuum controlled.
What is an EGR vacuum solenoid on a 1991 4.3 s10 and what it does?
The EGR (Exhaust Gas Recirculation) valve opens when vacuum is applied. The EGR vacuum solenoid opens and closes the vacuum supply to the EGR valve when it is commanded to do so by the ECM (Engine Control Module).
What is the function of the 98 Toyota Camry egr vacuum modulator?
EGR stands for Exhaust Gas Recirculation. The purpose of the EGR system is to lower the amount of oxides of nitrogen the engine produces. The parts of the system are the vacuum actuated EGR control valve, the vacuum switching valve, and the EGR vacuum modulator assembly.
Where is the EGR valve in a 1993 Cultas Cierra?
If it is an electronic EGR valve it is on the top of the engine on the rear left or drivers side it has three solenoids and a wire harness at the top IF YOU HAVE THE V6 (3.3) ENGINE IT DOES NOT HAVE AN EGR VALVE. IF YOU HAVE THE 2.2 4 CYL YOU HAVE A VACUUM TYPE EGR LOCATED ON THE END OF THE HEAD ABOVE THE TRANS.
Why No vacuum to egr valve 1995 s-10 2.2?
There won't be any vacuum to the egr while idling. Engine must be warmed up and under acceleration or cruising before vacuum opens egr valve.
Why No vacuum to egr valve 1995 s 10 2.2?
There won't be any vacuum to the egr while idling. Engine must be warmed up and under acceleration or cruising before vacuum opens egr valve.
What is the sensor PO400 on a 1998 esteem?
EGR { Exhaust Gas Recirculation} Flow Malfunction Early Exhaust Gas Recirculation (EGR) systems components include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Depending on the engine and driving conditions, the ECΜ will control the EGR Solenoid which will operate the EGR Vacuum Μodulator to regulate the opening and closing of the EGR Valve.
How do you replace the EGR valve in a 1996 Lexus ES300 to resolve 'insufficient flow' and 'check engine' message?
P0401 "egr insufficient flow" can indicate many things, including: 1-vacuum line plugged or leaking 2-pipe from exhaust to egr valve plugged 3-pipe to vacuum modulator valve from egr valve plugged 4-passages at egr are plugged 5-bad egr valve 6-bad EGR VACUUM MODULATOR VALVE I tried cleaning egr modulator valve, (beside/above egr)removed and tested egr vacuum & movement, inspected and cleaned all vacuum lines openings and pipes. All above did not work. I replaced the egr vacuum modulator valve. Light went out without a reset in about 30 miles of driving. Not sure if this valve can be cleaned. Retails for $69.US
What does a vacuum switching valve do?
The Vacuum switching valve controls the EGR Valve.
Does a 99 Mitsubishi diamante have an egr solenoid or just the egr valve. If it does have the solenoid where is it related to the valve?
Yes, the Diamante has an EGR solenoid. On any Mitsubishi, if the car has an egr valve, it has a solenoid to operate the valve. Just follow the vacuum line from the valve and it will go to the solenoid. There may be another one way valve between the valve and the solenoid, though. The solenoid is electronic.
