Zinc is a blush-white, moderately hard metal. It is brittle at room temperature and at temperatures above 150°C, being workable only in the range between 100°C and 150°C. It is an active metal and will displace hydrogen even from dilute acids ;))
Zinc turns into a gas at a temperature of approximately 907°C (1665°F). At this temperature, zinc undergoes sublimation, transitioning directly from a solid to a gas without passing through a liquid phase.
Yes. PbCl2 is a white solid, but it has a relatively low melting point for a metallic salt - just 501 degrees C as opposed to 801 degrees C for common salt sodium chloride or 786 degrees C for potassium chloride, or 772 degrees C for calcium chloride.
evaporation solid to liquid - melting liquid to gas - evaporation gas to liquid - condensation liquid to solid - freezing solid to gas and gas to solid - sublimation
Freezing (Liquid 2 solid) Melting (solid 2 liquid) Boiling (liquid 2 gas) Evaporation (liquid 2 gas) Condensation (gas 2 liquid) Sublimation (solid 2 gas) hope this helped
Depends on the temperature. the natural state is a solid. If you raise the temperature to its boiling state it will become a liquid and a further raise in temp will convert it to a vapor. (gas)
You can order zinc fluoride from chemical supply houses. The product you get is a white powder.
zinc is a solid because its a metal
Zinc is all, a solid, liquid, and a gas. when it is melted, it is a liquid, when the liquid is heated, it becomes a vapor, a gas, and when the liquid is froze is is a solid.
solid.
NaF is a solid at room temp
solid
Brittle solid
Solid
It is a metal and hence has very high melting and boiling points. Therefore, it is solid at room temperature
Zinc turns into a gas at a temperature of approximately 907°C (1665°F). At this temperature, zinc undergoes sublimation, transitioning directly from a solid to a gas without passing through a liquid phase.
evaporation solid to liquid - melting liquid to gas - evaporation gas to liquid - condensation liquid to solid - freezing solid to gas and gas to solid - sublimation
No, not all solutions are liquid. Solutions can exist in various states of matter, including solid, liquid, and gas. For example, a common solid solution is brass, which is a mixture of copper and zinc.