Does the key go all the way in ? If so, try moving the steering a little, it might be jammed to one side.
In the 1999 Crown Victoria the LCM, Lighting Control Module , contains the relay for the turn and hazard flashers. This located under the dash.
You don't say what year of Ford Crown Victoria , but if you move the turn signal lever forward it will turn on the high beam headlights
On a 1998 Ford Crown Victoria : If you mean that you want to turn on the high beam headlights ( push the turn signal lever forward , away from you )
Hit the button on the end of shift lever, which takes it out of overdrive.
the 4way mutil.switch. Headlights. turn sig. wiper washer. I was not the lcm.
Sounds like you are low on power steering fluid.
Yes it has one. Go to www.autozone.com and click component locations.
Replace the ignition switch, or try the correct key.
To release a stuck parking brake on a 1999 Ford Crown Victoria, first ensure the vehicle is in park and turn the ignition on. Depress the brake pedal fully and then pull the parking brake lever up slightly before pushing the release button while lowering the lever. If it remains stuck, check for frozen cables or malfunctioning components, and consider applying lubricant. If still unsuccessful, it may be necessary to consult a mechanic for further assistance.
UNDER THE HOOD THERE IS A COMPARTMEN TOWARD FRONT OPEN UP AND BULB IS THERE
It would be helpful if you can explain the " won't start " Does the engine turn? If it turns does not fire? Was it running before?
keep the door open and turn the key back wards depends on the year but most dealerships should od it for free