it is 30,000 Ksi or 3 x 10 E6 psi or 207000MPa
steel = 30 million psi
aluminium = 10 million psi
12.5 x 106 lbf/in2
77 GPa
23 GPa
yes
Shear modulus, which is also often referred to as the modulus of rigidity or torsion modulus, is a measure of the rigid or stiff nature of different types of solid materials. It is derived from the material's ratio of its shear stress value to that of shear strain. Shear stress is a value of how much force is applied to a square area of a material, usually measured in pressure values of pascals. Strain is the amount that the material has deformed under stress divided by its original length. The shear modulus value is always a positive number and is expressed as an amount of force per unit area, which is generally recorded as metric gigapascals (GPa) because the values are more practical than English equivalents.
p -0.29,e-12.4e3mpa
Ultimate shear stress of Mild steel is 210N/sq mm
140Gpa
shear = 77GPa
yes
yes
Shear Stress divided by the Angle of Shear is equals to Shear Stress divided by Shear Strain which is also equals to a constant value known as the Shear Modulus. Shear Modulus is determined by the material of the object.
what is the flexural modulus value od mild steel
Shear modulus, which is also often referred to as the modulus of rigidity or torsion modulus, is a measure of the rigid or stiff nature of different types of solid materials. It is derived from the material's ratio of its shear stress value to that of shear strain. Shear stress is a value of how much force is applied to a square area of a material, usually measured in pressure values of pascals. Strain is the amount that the material has deformed under stress divided by its original length. The shear modulus value is always a positive number and is expressed as an amount of force per unit area, which is generally recorded as metric gigapascals (GPa) because the values are more practical than English equivalents.
Most steels have Young Modulus, E, of 30 million psi and Poisson ratio, u, of about 0.30 Shear Modulus = E/2/(1+u) = 30/2.6 = 11.5 million psi
Shear modulus or Rigidity modulus:For material subjected to shear, Within the elastic limit, the shear stress is proportional to the shear strain.The value of Modulus of rigidity for steel is 80 - 100KN/mm^2
The Elastic Modulus (aka Young's Modulus) for annealed 304 stainless steel is 193 GPa. More data is available at: http://www.azom.com/details.asp?ArticleID=965
It is the ratio of shear stress to shear strain.
Shear modulus of soil is measured in pressure units, typically Pascals (Pa) or KiloPascals (KPa).
Did you mean A36 steel? As with most steels, A36 has a density of 7,800 kg/m3 (0.28 lb/cu in). Young's modulus for A36 steel is 200 GPa (29,000,000 psi). A36 steel has a Poisson's ratio of 0.32, and a shear modulus of 78 GPa (11,300,000 psi)